Product Description:
xluxury-autoparts part 2213205613 (2213205613 Right) is a new, not remanufactured, aftermarket rear strut assembly for the 2007-2013 Mercedes Benz S-Class (W221) and 2007-2014 CL-Class (W216) Sedan with AIRMATIC and both with and without 4MATIC. The Exchange Air Suspension Strut (221-320-56-13) you order from xluxury-autoparts will be for OEM part manufactured specifically to fit your 1954-2014 Mercedes-Benz vehicle. Mercedes-Benz Parts fit your vehicle like no others can. They’re engineered specifically to function with their fellow parts and systems, and they’re constructed from the finest materials available. They’re also subjected to rigorous testing, which means each part comes fully certified. In the end, you can be sure that your vehicle will perform up to its potential, mile after mile,This replacement strut, features a new custom-valved shock absorber assembled with a durable new Continental ContiTech rubber air spring bladder and no lower isolator seal which is subject to failure on the O.E. The strut is partly protected by an aluminum can and dust baffle to keep out debris and is assembled with heavy-duty crimping rings, seals, O-Rings and bump stop. This fully assembled air strut plugs directly into the vehicles electronic connector and eliminates fault codes
Pre-Assembled for Easy Installation
Durable ContiTech Air Bladder
Detailed Instruction Manual Available
Replace in Pairs
Application:
Mercedes-Benz S-Class W221
Compatile With Airmatic(RWD), 4Matic(4WD) and AMG Model.
S350 Base Sedan 4-Door 3.5L 2012-2013
S350 Base Sedan 4-Door 4.6L 2012-2013
S350 Base Sedan 4-Door 5.5L 2012-2013
S350 Bluetec 4Matic Sedan 4-Door 3.0L 2012-2013
S400 Hybrid Sedan 4-Door 3.5L 2010-2013
S450 4Matic Sedan 4-Door 4.6L 2008-2011
S500 Base Sedan 4-Door 5.5L 2007-2011
S550 4Matic Sedan 4-Door 4.6L 2012-2013
S550 4Matic Sedan 4-Door 5.5L 2007-2011
S550 Base Sedan 4-Door 4.6L 2012-2013
S550 Base Sedan 4-Door 5.5L 2007-2011
S600 Base Sedan 4-Door 5.5L 2007-2013
S63 AMG Base Sedan 4-Door 5.5L 2011-2013
S63 AMG Base Sedan 4-Door 6.0L 2010-2012
S63 AMG Base Sedan 4-Door 6.2L 2009-2013
S63 AMG Base Sedan 4-Door 6.3L 2008-2010
S65 AMG Base Sedan 4-Door 6.0L 2007-2013
Mercedes-Benz CL-Class C216
Compatile With Airmatic(RWD), 4Matic(4WD) and AMG Model.
CL500 Base Coupe 2-Door 4.7L 2013
CL500 Base Coupe 2-Door 5.5L 2007-2012
CL550 4Matic Coupe 2-Door 4.6L 2011-2014
CL550 4Matic Coupe 2-Door 5.5L 2009-2010
CL550 Base Coupe 2-Door 5.5L 2007-2008
CL600 Base Coupe 2-Door 5.5L 2007-2014
CL63 AMG Base Coupe 2-Door 5.5L 2011-2014
CL63 AMG Base Coupe 2-Door 6.0L 2010-2012
CL63 AMG Base Coupe 2-Door 6.2L 2008-2011
CL63 AMG Base Coupe 2-Door 6.3L 2008-2010
CL65 AMG Base Coupe 2-Door 6.0L 2008-2014
CL65 AMG Base Coupe 2-Door 6.2L 2009
Important Fitment Notes(Must Read):
NOT fit on Vehicles Equipped with Active Body Control(ABC) Suspension Models
Generation & Evolution:
Mercedes-Benz S-Class
W116 First generation (1972-1980)
W126 Second generation (1980-1991)
W140 Third generation (1991-1998)
W220 Fourth generation (1998-2005)
W221 Fifth generation (2006-2013)
W222 Sixth generation (2014-present)
Mercedes-Benz CL-Class
C140 First generation (1992-1999)
C215 Second generation (1999-2006)
Chassis Coupé of Mercedes-Benz S-Class (W220)
C216 Third generation (2006-2014)
Mercedes-AMG
S63 AMG (2008-2013)
M156 5.5 L V8 Bi-Turbo
S65 AMG (2007-2013)
M275 6.0 L V12 Bi-Turbo
CL63 AMG (2010-2014)
Version of CL500 BlueEFFICIENCY
With AMG 5.5-litre V8 engine
CL65 AMG (2010-2014)
Version of CL600
With increased engine power to 630 PS
Platform Drive Layout:
Base Model-Rear Wheel Drive Layout
4Matic Model-Four Wheel Drive Layout
Signs that your air suspension needs to be replaced include:
1.Abnormal Sounds
2.Poor Handling Stability
3.Air Leakage
4.Car Body Slant
5.Irregular Tire Wear
6.Over Bend
Note Before Installation:
1.To avoid the possibility of short circuits while working with electric components consult your owner's manual on how to disconnect your battery.
2.Consult your vehicle owner's manual, service manual, or car dealer for the correct jacking points on your vehicle and for additional care, safety and maintenance instructions. Under no circumstances should any work be completed underneath the vehicle if it is not adequately supported, as serious injuries and death can occur.
Removal Guideline:
Caution: Damage to the vehicle and air suspension system can be incurred if work is carried out in a manner other than specified in the instructions or in a different sequence.
1.To avoid the possibility of short circuits while working with electric components consult your owner's manual on how to disconnect your battery.
2.Consult your vehicle owner's manual, service manual, or car dealer for the correct jacking points on your vehicle and for additional care, safety and maintenance instructions. Under no circumstances should any work be completed underneath the vehicle if it is not adequately supported, as serious injuries and death can occur.
1.Set steering to straight ahead.
2.Lift vehicle and remove rear right wheel.(picture 1)
3.Remove the brake caliper clip.(picture 2)
4.Remove the two(2)bolts holding the brake caliper.Remove the brake caliper and suspend to prevent damage to brake lines.(picture 3,4)
5.Remove the fasteners and inner wheel liner to expose the rear air strut's wiring block.(picture 5,6)
6.Remove the metal clip and plug for the rear air strut's dampening coil.(picture 7,8)
7.Remove the lower sway bar end link nut and separate.(picture 9)
8.Remove the lower air strut mounting nut.(picture 10)
9.Remove the lower control arm nut.(picture 11)
10.Remove the rear dash cover from inside of the vehicle.(picture 12)
11.Pull back the foam insulation to expose the air strut top mount.(picture 13)
12.Remove the air line.(picture 14,15)
13.Remove the three(3)top mounting nuts.(picture 16)
14.Remove the lower control arm bolt and the lower air strut mounting bolt.(picture 17)
15.Pull down on the lower control arm and remove the air strut from the vehicle.(picture 18)
16.Removal complete.
Installation Guideline:
Installation is in reverse order of air strut removal.
OEM Part Number:
2213205613,2213205813
Highlight:
- Whether you are looking for new complete units for replacement, or new components to rebuild your existing assemblies, contact xluxury-autoparts for you air suspension needs. Our factories use only top quality components, and manufacture to strict industry standards including ISO, QS, and TS Standards,This replacement air strut matches the fit and function of the original equipment strut on specified vehicle applications to restore ride control and prevent damage to other air suspension components.
- Performance Matches or Excedes OEM For A Long Life and Oustanding Ride Control
- All Products Are New, We Do Not Sell Re-Manufactured Units
- Ideal replacement - this air strut replaces the original equipment strut on specified vehicle applications to restore ride quality
- Durable construction - this air strut features quality rubber and metal components
- Thoroughly tested - this air strut has undergone vehicle try-on and durability testing for conformance to product standards and quality
- Trustworthy design - backed by team of engineers
Package Included:
Single for Rear Right Air Suspension Shock Strut
Note:
1.Please double confim the compatibility as well as the OEM number before purchasing.
2.Instruction is not included. Professional installation is recommended
3.Please feel free to contact us for whatever we can help via eBay message; every message will be replied in 12 hours.
