Note please: Two colors of light can be selecte

1：Low beam yellow light, high beam white light

2：Low beam white light, high beam white light

Auxiliary lights for motorcycles

Let all motorcycles use good spotlights.

Distance and near yellow and white light integrated paving tangent light, second-generation glass optical lens.

Road Real Shot

Far and near beam distance is more reasonable.

The future eye only uses glass optical lenses

High-quality LED chips combined with glass optical lenses,

The distance between the far and near beams is more suitable for the industry to solve the problem that the near beam is too close and the far beam is too high.

Glass lens VS Plastic lens

The Eye of the Future only uses optical glass lenses. The glass lenses will not yellow after long-term use, with high temperature resistance and light transmittance as high as 99%.

The plastic lens will turn yellow when used for a long time, which will affect the brightness, the light transmittance is low, and the high temperature resistance is not as high as that of glass.

IP67 waterproof without fear of wind and rain

During the motorcycle journey, waterproofing is more important. IP67 waterproof ability. The whole lamp will work as usual when immersed in water, so you can easily cope with the harsh environment with your car.

Intelligent anti-loss protection

The industry's first zero-power smart line group, integrated design of electronic relays, and intelligent protection against power loss.

Note please: The size is for reference only, there will be a certain error in manual measurement

(this is the size of the lamp body, without bracket)

Product parameter:

Input voltage: 12V~37V

Product power: low beam 56w, high beam 56w

Product color temperature: 3500K~6500K

Diameter of pipe clamp: 22mm-32mm

Waterproof rating: IP67 waterproof and dustproof

Lighting mode: low beam, high beam, burst flash, left and right flash

Light color: low beam yellow and high beam white, low beam white and high beam white

Applicable models: motorcycle, electric vehicle

Product lumens: low beam 6500 lumen, high beam 6500 lumen

Installation process:

1- Switch and wire group connection；

2-Spotlight and wire group connection (can be used in rainy days)；

3- Connect the positive and negative poles of the battery (the red wire harness with fuse is connected to the positive pole of the battery, and the fuse is 15A)；

4- The separate small red line is the Acc line ACC line description: The spotlight will only turn on when the key is turned on after the line is connected. It will not turn on if the key is not turned on. It is recommended to use the car battery to test first and confirm that it is installed correctly in the wiring. The ACC line can be connected to the electric door lock output line , Turn signal, tail light, original car fuse.

Real shot loading effect

Unique appearance design, the loading effect is more fashionable and avant-garde.