Application:
For Audi R8 4.2 FSI(423) 2009-2015
For Audi R8 5.2 FSI(429) 2011-2015
Air Suspension Structure:
Generation & Evolution:
Audi R8
First generation (Type 42 2006-2015)
Second generation (Type 4S 2015-2024)
Platform Drive Layout:
Longitudinal mid-engine, rear-wheel-drive / all-wheel-drive
Signs that your air suspension needs to be replaced include:
1.Abnormal Sounds
2.Poor Handling Stability
3.Air Leakage
4.Car Body Slant
5.Irregular Tire Wear
6.Over Bend
Note Before Installation:
1.To avoid the possibility of short circuits while working with electric components consult your owner's manual on how to disconnect your battery.
2.Consult your vehicle owner's manual, service manual, or car dealer for the correct jacking points on your vehicle and for additional care, safety and maintenance instructions. Under no circumstances should any work be completed underneath the vehicle if it is not adequately supported, as serious injuries and death can occur.
Removal Guideline:
Caution: Damage to the vehicle and air suspension system can be incurred if work is carried out in a manner other than specified in the instructions or in a different sequence.
1.To avoid the possibility of short circuits while working with electric components consult your owner's manual on how to disconnect your battery.
2.Consult your vehicle owner's manual, service manual, or car dealer for the correct jacking points on your vehicle and for additional care, safety and maintenance instructions. Under no circumstances should any work be completed underneath the vehicle if it is not adequately supported, as serious injuries and death can occur.
1.Raise vehicle at lifting points prescribed by manufacturer
2. Remove applicable engine baytrimto gain accesstothetop strut mount.
3.Slowly disconnect air line fitting fromthetop ofthe strut.
4.Remove used air line fitting from the air line and discard. use the figure below as an example.
5.Remove front left wheel.
6.Disconnect the two (2) electrical connectors from the strut.
7.Unroute the lines and disconnect the strut wire harness from the lower mount of the
strut.
8.Remove lower strut bolt and nut.
9.Remove the three (3) top mount nuts.
10.Remove bolt and nut from spindle and disconnect.
11.Remove the strut from the vehicle.
12.Remove top mount plate from the strut. this will be reused in the installation.
13.Removal complete.
Installation Guideline:
Installation is in reverse order of air strut removal.
OEM Part Number:
Front Left:
420412019AG 420412019AJ 420412019Q 420412019S 420412019AF 420412019AK
Front Right:
420412020AG 420412020AJ 420412020Q 420412020S 420412020AF 420412020AK
Rear Left:
420512019G, 420512019M, 420512019N, 420512019AE, 420512019AH 420512019AK, 420512019Q, 420512019AL, 420512019AF, 420512019AM
Rear Right:
420512020G, 420512020M, 420512020N, 420512020AE, 420512020AH 420512020AK, 420512020Q, 420512020AL, 420512020AF, 420512020AM 420512020AJ
Highlight:
1. 100% Air Tightiness testing
2. 24 hours air tightness test ≤0.02MPa
3. Anti-corrosion and provide a more consistent wear surface
4. Built to strict quality control standards
5. CNC Machined Components
6. Designed for Comfort Suspension
7. Direct replacement for OEM strut without modification
8. Easy to install
9. Eliminating abnormal sound
10. Gives the driver more control of ride
11. Good heat dissipation
12. It has a high compressive strength and good sound insulation to ensure our driving comfort and safety
13. Restore the original ride height and improve ride quality
14. Test more than 3 million times
15. Sturdy & Durable Material
Package Included:
4PCS for Front Rear Left and Right Shock Absorber Struts Assembly
Note:
1.Please double confim the compatibility as well as the OEM number before purchasing.
2.Instruction is not included. Professional installation is recommended
3.Please feel free to contact us for whatever we can help via eBay message; every message will be replied in 12 hours.
