Note:When using this LED bulbs for Headlight, if it will hyper flash, you can add resistors(not included) to fix the issue.
NOTE:
This kit is for vehicles with Factory Halogen Systems, it will not work with vehicles with Factory HID.Pls confirm the item if it can matches your car before you purchase.
Compatible list can not show up all car model，it is only for reference. It may exist someting error for some car model because of the car upgradtion and car modification.So please make 100% sure before you purchase.Otherwise, we are not responsibe for this, thanks for your cooperations!
Specification:
Headlight:
Plug Type: H7,High Beam + H11 Low Beam
LED Quantity(each bulb): 4pcs* CSP chips
Wattage: 72W/Pair ， 36W/Bulb
Color Temperature: White 6000K
Waterproof: Aviation 6063 aluminum profile
Operating Temperature: -40-176° degree Celsius
Voltage:9V to 36V.Wide-range voltage，constant urrent control，anti-interference circuit design.
Apprication:Upgrade for Car，Truck，SUV，RV Xenon Headlight，ALL IN ONE Style, no extra driver needed .
Long range：6000K color temperature and 200m light range.
NEW Mini Hi-Low Beam LED headlight conversion kit
Features:
100% New and Never Used
Super bright CSP chip,360 degree clear beam no blind zone
IP Rate: IP67
Built-in Cooling Fans & Ballasts , Smart Efficient Cooling System Fast Heat Dissipation，No Other Fans & Ballasts Required
Built-in constant current CPU,instant full brightness without start-up relay
High quality Aluminum heat dissipation ensures the secure temperature range
Low Power Consumption than Halogen bulb, Energy Saving
Low Voltage Protection, High Precision Constant Current driver Chip
Shakeproof and Long lasting up to 50,000 Hours.
Heat Dissipation Theory: Heat Pipe Technology + A380 Aluminum Heatsink
Easy installation
Specification:
Headlight:
Plug Type: H7,High Beam + H11 Low Beam
LED Quantity(each bulb): 4pcs* CSP chips
Wattage: 72W/Pair ， 36W/Bulb
Color Temperature: White 6000K
Waterproof: Aviation 6063 aluminum profile
Operating Temperature: -40-176° degree Celsius
Voltage:9V to 36V.Wide-range voltage，constant urrent control，anti-interference circuit design.
Apprication:Upgrade for Car，Truck，SUV，RV Xenon Headlight，ALL IN ONE Style, no extra driver needed .
Long range：6000K color temperature and 200m light range.
NEW Mini Hi-Low Beam LED headlight conversion kit
Features:
100% New and Never Used
Super bright CSP chip,360 degree clear beam no blind zone
IP Rate: IP67
Built-in Cooling Fans & Ballasts , Smart Efficient Cooling System Fast Heat Dissipation，No Other Fans & Ballasts Required
Built-in constant current CPU,instant full brightness without start-up relay
High quality Aluminum heat dissipation ensures the secure temperature range
Low Power Consumption than Halogen bulb, Energy Saving
Low Voltage Protection, High Precision Constant Current driver Chip
Shakeproof and Long lasting up to 50,000 Hours.
Heat Dissipation Theory: Heat Pipe Technology + A380 Aluminum Heatsink
Easy installation
Package Included:
2x LED High Bulbs
2x LED Low Bulbs
2x LED High Bulbs
2x LED Low Bulbs
New and old packaging will be shipped randomly
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
WARNING ABOUT POLARITY
Unlike halogen bulbs, LED are polarity sensitive.
BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
- if your light turns on, please proceed to install both bulbs onto your vehicle.
- if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.
NOTE:
Please contact us first before you leave a negative feedback, we will try our best to solve problem for you. Thanks.
Unlike halogen bulbs, LED are polarity sensitive.
BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
- if your light turns on, please proceed to install both bulbs onto your vehicle.
- if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.
NOTE:
Please contact us first before you leave a negative feedback, we will try our best to solve problem for you. Thanks.
On Oct 29, 2025 at 01:03:11 PDT, seller added the following information: