ETCR2100A+ Digital Clamp On Ground Earth Resistance Meter Tester Gauge 0.01-200Ω
 
Introduction:
ETCR2100A+ Clamp Earth Resistance Tester is widely applied in ground resistance measurement, loop resistance measurement in fields such as electric power, telecommunications, meteorology, oil field, architecture and industrial electrical equipment etc. When measuring ground system with loop, there is no need to disconnect the ground wire without auxiliary electrode, which means safer and faster. ETCR2100A+ Clamp Earth Resistance Tester can measure the ground fault which can not be measured by traditional method, can apply in the occasion where traditional methods are unworkable.
 
Specifications:
 
Function
Ground  resistance test, Loop resistance test
Power Supply
6VDC (4 * AA  batteries) Not included
Resistance Range
0.01-200Ω
Resistance Resolution
0.001Ω
Highest Resistance Accuracy
±1%±0.01Ω
Data memory
99 Sets
Alarm Threshold Setting Range
Resistance:  1-199Ω
Alarm Sound and Light
“Beep-beep-beep” alarm tone, Alarm  Symbol  Flashing, Press AL key to turn on, turn off  Alarm or set  Alarm Threshold.
Interference Signal Recognition
“Beep-beep-beep” tone, NOISE symbol blinking
Working Temperature and Humidity
-20℃-55℃;20%RH-90%RH
LCD Screen
4 Digits LCD  display, Screen L×W: 47mm×28.5mm
Clamp Size
65mm × Φ32mm
Clamp Opening Extent
32mm
Tester Weight
1160g (With batteries)
Clamp Dimension
L×W×T: 285mm×85mm×56mm
Protection Level
Dual  Insulation
Structural Feature
Clamp CT
Shifting
Automatic shifting
External magnetic field
<40A/m
External electrical field
<1V/m
Single measurement time
0.5 second
Resistance measurement frequency
>1KHz
Measured  current frequency
50/60Hz Automatic measurement
Low Battery Indication
Low battery symbol displays when battery is lower then 5.3V
Memory Full Indication
MEM symbol blinks when all 99 sets  memory is full
Over Range Indication
Out of range indication “OLΩ”, “L0.01” or “OL A”
Auto Power-off
5 minutes after Boot up
Power Consumption
Max. 50mA either in booting up or normally working,  Continuously working for 30 hours
RS232  Interface (Optional)
The data  stored in the meter are  uploaded to the  computer through RS232 interface and data  wire, Then  generate report files
Accessories
Meter: 1  piece, Test ring: 1 Piece,  Meter Suitcase:  1 Piece


 
Range and Accuracy:
 
Measurement mode Measurement ranges Resolving power Accuracy
Resistance 0.010Ω-0.099Ω 0.001Ω ± (1%+0.01Ω)
Resistance 0.10Ω-0.99Ω 0.01Ω ± (1%+0.01Ω)
Resistance 1.0Ω-49.9Ω 0.1Ω ±(1%+0.01Ω)
Resistance 50.0Ω-99.5Ω 0.5Ω ±(1.5%+0.5Ω)
Resistance 100Ω-199Ω ±(2%+1Ω)
 
Package includes:
1 × ETCR2100A+ Resistance Meter
1 x Test Ring
1 x Meter Suitcase
(The package do not include the batteries)
 
Note:
Import duties and taxes are NOT included in the item price or shipping cost, buyer is responsible for it.
The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
Please allow slight manual measurement deviation for the data.
 
 
 
 
 

 


On 14-Sep-2023 at 06:17:07 BST, seller added the following information:

 

DataCaciques
Start selling to international eBay sites.
eBay Cross Border Trade powered by ChannelEffect
PushAuction