Install Note: please remove the EPE between the Radiator and Shroud
Description:
This Aluminum Radiator is designed to provide maximum cooling efficiency to prevent premature engine failure. Its light-weight, and high-heat transferring aluminum features a tube and fin design that, dramatically increases surface area that enables the heat to dissipate more efficiently.
This Aluminum Radiator is at least 35%-45% more efficient than stock ones. Most importantly, it has a much higher capacity for coolant than stock ones, which means that your cooling system will be more efficient and will be more resistant to temperature surges in racing applications.
Professional Installation is Highly Recommended
No Instruction Included
Radiator Configuration:
100% Brand new and never been used.
Direct Bolt-On OE Fitment or Replacement
Improves Cooling by 35% to 45% Temperature
Core Size: (415 x 608 x 44mm)16.3" H x 24" W x 1.73" T
Overall size: 21" H x 25.4" W
Upper Inlet: 1 1/2" located on the Passenger side
Lower Outlet: 1 3/4" located on the Passenger side
Transmission Oil Cooler Fitting Type: 1/8-27NPT
New radiator cap include
3 Rows Of Tubes
DPI: 338
WILL FIT AUTOMATIC OR MANUAL TRANSMISSIONS
Fan size:
The fan and the fan shroud effectively drive the heat over and out the engine compartment rather than thrusting it into the front of the engine. The fan shroud basically houses the fan blades securing it in place and keeping it from damaging the other engine components that may disturb the smooth and even operation of the engine. With excellent operating temperature management, allowable levels of engine temperature are stabilized. Investing in proper maintenance though will considerably benefit the ride and driving quality in maintaining the ideal working conditions of the engine.
Maximum Fan CFM: 1730 cfm
Fan Diameter (in): 12.050"
Thickness (in): 2.500"
Number of Blades: 10 blades
Maximum Fan RPM: 2,250 rpm
Blade Material: Plastic
Amp Draw: 12.70 amps
Application:
1968 Ford Mustang V8 4.7L Engine with AC or Heavy Duty Cooling
1968-1969 Ford Mustang V8 5.0L Engine with AC or Heavy Duty Cooling
1969 Ford Mustang V8 5.8L Engine with AC or Heavy Duty Cooling
1967-1968 Mercury Cougar V8 4.7L Engine with AC
1968 Mercury Cougar V8 5.0L Engine with AC
1969-1970 Mercury Cougar V8 5.8L Engine with AC
1968-1969 Ford Mustang Base V8 5.0L
1969 Ford Mustang Base V8 5.8L
1968 Ford Mustang Base V8 4.7L
1969 Ford Mustang Boss 302 V8 5.0L
1968 Ford Mustang Shelby GT-350 V8 5.0L
1969 Ford Mustang Shelby GT-350 V8 5.8L
1967-1968 Mercury Cougar Base / XR-7 V8 4.7L
1968 Mercury Cougar Base / XR-7 V8 5.0L
1969-1970 Mercury Cougar Base / XR-7 V8 5.8L
Ford Mustang 1967-1970
Ford Fairlane 1969
Ford Ranchero 1969
Mercury Cougar/XR7 1967-1970
Note: Both top hose and bottom hose on passenger side 24"wide product
If you need top hose on passenger side, bottom hose on driver side, Or If you need 20" Wide products,we also have them.
Package include:
1 X 3-Row Aluminum Radiator (Includes New Radiator Cap)
1 X Aluminum Shroud
2 X 12" Fan
Description:
This Aluminum Radiator is designed to provide maximum cooling efficiency to prevent premature engine failure. Its light-weight, and high-heat transferring aluminum features a tube and fin design that, dramatically increases surface area that enables the heat to dissipate more efficiently.
This Aluminum Radiator is at least 35%-45% more efficient than stock ones. Most importantly, it has a much higher capacity for coolant than stock ones, which means that your cooling system will be more efficient and will be more resistant to temperature surges in racing applications.
Professional Installation is Highly Recommended
No Instruction Included
Radiator Configuration:
100% Brand new and never been used.
Direct Bolt-On OE Fitment or Replacement
Improves Cooling by 35% to 45% Temperature
Core Size: (415 x 608 x 44mm)16.3" H x 24" W x 1.73" T
Overall size: 21" H x 25.4" W
Upper Inlet: 1 1/2" located on the Passenger side
Lower Outlet: 1 3/4" located on the Passenger side
Transmission Oil Cooler Fitting Type: 1/8-27NPT
New radiator cap include
3 Rows Of Tubes
DPI: 338
WILL FIT AUTOMATIC OR MANUAL TRANSMISSIONS
Fan size:
The fan and the fan shroud effectively drive the heat over and out the engine compartment rather than thrusting it into the front of the engine. The fan shroud basically houses the fan blades securing it in place and keeping it from damaging the other engine components that may disturb the smooth and even operation of the engine. With excellent operating temperature management, allowable levels of engine temperature are stabilized. Investing in proper maintenance though will considerably benefit the ride and driving quality in maintaining the ideal working conditions of the engine.
Maximum Fan CFM: 1730 cfm
Fan Diameter (in): 12.050"
Thickness (in): 2.500"
Number of Blades: 10 blades
Maximum Fan RPM: 2,250 rpm
Blade Material: Plastic
Amp Draw: 12.70 amps
Application:
1968 Ford Mustang V8 4.7L Engine with AC or Heavy Duty Cooling
1968-1969 Ford Mustang V8 5.0L Engine with AC or Heavy Duty Cooling
1969 Ford Mustang V8 5.8L Engine with AC or Heavy Duty Cooling
1967-1968 Mercury Cougar V8 4.7L Engine with AC
1968 Mercury Cougar V8 5.0L Engine with AC
1969-1970 Mercury Cougar V8 5.8L Engine with AC
1968-1969 Ford Mustang Base V8 5.0L
1969 Ford Mustang Base V8 5.8L
1968 Ford Mustang Base V8 4.7L
1969 Ford Mustang Boss 302 V8 5.0L
1968 Ford Mustang Shelby GT-350 V8 5.0L
1969 Ford Mustang Shelby GT-350 V8 5.8L
1967-1968 Mercury Cougar Base / XR-7 V8 4.7L
1968 Mercury Cougar Base / XR-7 V8 5.0L
1969-1970 Mercury Cougar Base / XR-7 V8 5.8L
Ford Mustang 1967-1970
Ford Fairlane 1969
Ford Ranchero 1969
Mercury Cougar/XR7 1967-1970
Note: Both top hose and bottom hose on passenger side 24"wide product
If you need top hose on passenger side, bottom hose on driver side, Or If you need 20" Wide products,we also have them.
Package include:
1 X 3-Row Aluminum Radiator (Includes New Radiator Cap)
1 X Aluminum Shroud
2 X 12" Fan
BEFORE YOU BUY, PLEASE MAKE SURE THE FOLLOWING POINTS:
1.Compare car part with picture on our website
2. Make sure our goods is suitable for your car
3. Compare core size, overall size, inlet outlet size etc
4. Anything unclear, please contact our custom service
2. Make sure our goods is suitable for your car
3. Compare core size, overall size, inlet outlet size etc
4. Anything unclear, please contact our custom service
Note: Our shop have a variety of models of separate 2/3/4 row radiator, separate shroud + fan, integrated radiator + shroud + fan for sale, excellent quality, good price, welcome to purchase!
We have warehouses in CA, NJ, GA which can guarantee the fast delivery to any city in United States
