(6pcst)9005 H11 5202 LED headlight High-Low Beam + Fog Light conversion kit
Latest LED chip(USA) light source,2 luminous faces no blind zone 500% brighter than original halogen bulbs Soft White light in solid beam pattern, will not dazzle on-coming traffic.
Xenon white light reflect road paint/signs better to show clearer road situation during night driving
270 degree low beam angle with cut-off line,will not dazzle oncoming traffic
All-in-one heat conduction light bulb in appropriate working temperature Built-in constant current CPU, instant full brightness without start-up relay
Easy To Install Almost 1:1 mini design as halogen, easy to install in 10 minutes without any modification.
Technical Specification:
Plug Type: 9005 +H11+5202 High Beam Headlight + Low Beam Headlight + Foglight
Features：Industry leading Copper tube cooling design, Strong light cutoff line design
Power(per set): 55W/Bulb
Luminous Flux: 12000LM/set
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: Pure White 6000K
IP67 rated water and dust seal, over 50000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -35-55 degree Celsius
Usage: headlight,fog light
Package Included:
2x 9005 LED HeadLights Bulbs High beam
2x H11 LED HeadLights Bulbs Low beam
2x 5202 LED Foglight Bulbs
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.