Loop Resistance Meter Clamp on Ground Resistance Tester with Range 0.01 to 1200Ω
Note: Battery cannot be included during the shipping !!!
Instruction:
1. Clamp Earth Resistance Tester is our company's technology research and development team on technical quality of the pursuit of excellence, through continuous innovation to improve, upgrade with the old product. Its performance is mainly reflected in:
- Breakthrough in self-test the boot a long time to waiting, start immediately into the test.
- Breakthrough relay self-test mode, using the most advanced processing algorithms and digital integration technology.
- Breakthrough the old product too heavy issues, more in line with characteristics of hand-held devices.
- New design, panel operation with 6 buttons, better performance.
- Increase sound and light alarm function, with "beep-beep-beep” alarm sound.
- Increase the interference signal recognition indicator function, with "beep-beep-beep” indicator.
- Measurement range: 0.01Ω-1200Ω
- Stored data 99 Units. Lower power consumption, Maximum operating current less than 50mA.
2. Clamp Earth Resistance Tester is widely used in the grounding resistance measurement of the power, telecommunications, meteorology, oilfield, construction and the industrial and electrical equipment. In the measurement of a grounding system with loop, does not require breaking down the grounding down lead, and no need the auxiliary electrode. It is safe, fast and simple in use. The tester can measure ground faults which cannot be measured by traditional methods. It can be used in applications where traditional methods cannot be measured, because the ETCR series clamp grounding resistance meter measures the combined value of grounding body resistance and grounding lead resistance.
Specification:
|
▲Function Ground resistance test, Loop resistance test
▲Power Supply 6VDC 4 PCS of AA Alkaline batteries（not included）
▲Resistance Range 0.01-1200Ω
▲Resistance Resolution 0.001Ω
▲Highest Resistance Accuracy ±1%±0.01Ω
▲Data memory 99 Sets
▲Alarm Threshold Setting Range Resistance: 1-199Ω ▲Alarm Sound and Light "Beep-beep-beep" alarm tone, Alarm Symbol Flashing, Press AL key to turn on, turn off Alarm or set Alarm Threshold.
▲Interference Signal Recognition "Beep-beep-beep" tone, NOISE symbol blinking
▲Working Temperature and Humidity -20°c-55°c; 20%RH-90%RH
▲LCD Screen 4 Digits LCD display, Screen L*W: 47mm*28.5mm
▲Clamp Size 65mm×32mm
▲Clamp Opening Extent 32mm
▲Tester Weight 1160g
▲Clamp Dimension L*W*T: 285mm*85mm*56mm
▲Protection Level Dual Insulation
▲Structural Feature Clamp CT
▲Shifting Automatic shifting
▲External magnetic field <;40A/m
▲External electrical field <;1V/m
▲Single measurement time 0.5 second
▲Resistance measurement frequency >1KHz
▲Measured current frequency 50/60Hz Automatic measurement
▲Low Battery Indication Low battery symbol displays when battery is lower then 5.3V
▲Memory Full Indication M
▲ Accessories:Meter: 1 piece, Test ring: 1 Piece, Meter Suitcase: 1 Piece |
Packing:
|
Package |
Outer package |
Carton |
|
Inner package |
Aluminum case |
|
|
Accessory |
Meter |
1pcs |
|
Aluminum Case |
1pcs |
|
|
Test Ring |
1pcs |
|
|
Manual |
1pcs |
|
|
Certification |
1pcs |
|
|
Warranty Card |
1pcs |