Dental high and low speed handpiece air scaler kit
Specification:
High speed handpiece
Chuck Type：Push button
3 port spray
Ceramic bearing
Head Size:Ø12.3 *H13.5 mm
Bur applicable:Ø 1.59mm-Ø1.6mm
LED handpiece integrate E-generator
Air Pressure：0.25-0.3 Mpa
Water pressure：0.25-0.3 Mpa
Rotor Speed：280,000-350,000R.P.M
Noise:≤70dB
4 holes or 2 holes optional
135°C Autoclavable
Low speed handpiece kit
External water spray
Gear ratio：1:1 direct drive
Chuck Type：Latch contra angle
Air pressure:0.25-0.3MPA
Bur applicable:ø2.35mm
Rotation speed:20,000 rpm
Noise:≤70dB
ISO E-TYPE Connect
135°C Autoclavable
4 /2Hole Air motor
Air scaler handpiece
Air Pressure：0.28-0.35MPa
Working Frequency: 6200-6450Hz
135°C Autoclavable
Tips model:G1,G2,G4
Packing List:
High speed handpiece*1
Contra angle*1
Straight handpiece*1
Air motor*1
Air scaler handpiece*1
Other accessories
Dental High & Low Speed Handpiece Kit
Specification:
High speed handpiece
Description: | Standard Push button type, high speed handpiece, Single-way water spray |
Needle Change Type | Push button |
Air Pressure | 180~250 KPa (1.8~2.5 kgf/cm2) |
Water Pressure | 198Kpa (2 kg) |
Rotation Speed | 370,000-420,000 rpm |
Head Hight | 13.14 mm |
Head Diameter | φ11.2 mm |
Bur Applicable | φ1.59mm~φ1.6mm×21mm~23mm (diameter×length) |
Noise | ≤70dB |
Low speed kits Features:
- E-type connector
- Wrench type
- Precise technology, Steady, no vibration while revolving, offering a steady operation.
- Suitable for any E-type handpiece accords with ISO standard
- 135°C Autoclavable, suitable for both steam and chemical autoclave
Contra angle handpiece
- Low Speed 22,000-27,000 rpm.
- The shank of the instrument mounted therein is 2.35 mm
- Fastening of the instruments with a turning latch
- Autoclavable 135°C
- For any lab or E-type motors
Straight Nosecone
- Working pressure: 0.3MPa ;
- 0.25MPa (Measure meter is installed at the end of air motor to measure the air pressure).
- Revolution: about 22000-27000r/min (adjustable between clockwise or anticlockwise)
- Noise: ≤68dB
- Air consumption: about 56L/min
- Ratio: 1:1
- Max speed of contra angle: 25000rpm/min.
Air Mortor
- Supply air pressure: 245-392KPa (2.5-4kgf/CM2)
- 1:1 Direct Drive
- 4 Hole
- Max speed 20,000 min-1
Specifications
Air-in Pressure(kg/c㎡) | Motor Rotation(rpm) | Air Wastage:(N1/min) |
2.5 | 22,000 | 42 |
3 | 25,000 | 51 |
4 | 27,000 | 72 |
Packing List:
- High speed handpiece push button 4 Holes : 2 each
- E-type air motor 4-Holes: 1 each
- Straight nose cone: 1 each
- Contra Angle handpiece: 1 each
- Water spray nozzle: 1 each
- Oil spray nozzle: 1 each
- CAP Spanner: 2
