Product Advantages:
9005 (High Beam) + 9006 (Low Beam) + 9145 (Fog Light)
High brightness
High temperature resistant
High purity of luminescence
Good stable performance
Built-in Driver Ballast
Instant on fast cooling
Energy saving environmental
Long lifespan(>50000hr)
Interchange Part Number: Use for high Beam, Low Beam, DRL or Fog Lights…
LED Type: 6Pcs Led Chips Each Bulb
Other Part Number: 6000K (Xenon HID Pure White) Head Light Lamp Bulbs
Beam Angle: 360 Degrees
Placement on Vehicle: Left, Right, Front
Color: 6000K (Pure White Color)
Condition: 100%Brand New/ Never Used
Need additional Parts or Modification? 100% Integrated Design, Plug and Play. (Few vehicles may require load resistors to stop flickering or fix error message)
9005 (High Beam) + 9006 (Low Beam) + 9145 (Fog Light)
High brightness
High temperature resistant
High purity of luminescence
Good stable performance
Built-in Driver Ballast
Instant on fast cooling
Energy saving environmental
Long lifespan(>50000hr)
Interchange Part Number: Use for high Beam, Low Beam, DRL or Fog Lights…
LED Type: 6Pcs Led Chips Each Bulb
Other Part Number: 6000K (Xenon HID Pure White) Head Light Lamp Bulbs
Beam Angle: 360 Degrees
Placement on Vehicle: Left, Right, Front
Color: 6000K (Pure White Color)
Condition: 100%Brand New/ Never Used
Need additional Parts or Modification? 100% Integrated Design, Plug and Play. (Few vehicles may require load resistors to stop flickering or fix error message)
UPGRADED FEATURES:
♦500% BRIGHTER THAN HALOGEN
55W 3800Lumens per pair superior brightness flux adopt upgraded larger size LED obtain strong brightness vision.
♦PERFECT BEAM PATTERN
The ultra-thin surface interval of the light pole makes the chips of the led bulb much closer to projecting a Super-Focused beam, a wider and farther illumination range,
no blinding or glare to oncoming traffic, safer and reliable.
The ultra-thin surface interval of the light pole makes the chips of the led bulb much closer to projecting a Super-Focused beam, a wider and farther illumination range,
no blinding or glare to oncoming traffic, safer and reliable.
♦5-MIN QUICK INSTALLATION
Almost 1:1 mini size design as halogen, easy to install.
♦50,000 HOURS LONGER LIFESPAN
High efficient heat dissipation cooling system, consists of an Aviation Aluminum hollow-carved heat sink and 12000rpm powerful turbofan.
♦50,000 HOURS LONGER LIFESPAN
High efficient heat dissipation cooling system, consists of an Aviation Aluminum hollow-carved heat sink and 12000rpm powerful turbofan.
Package include:
6x LED Headlight Bulbs
9005 (High Beam) + 9006 (Low Beam) + 9145 (Fog Light)
Automotive LED headlamps advantages:
1. LED lights than traditional halogen energy, more power.
2. Xenon lamp brightness and proximity , but the LED lights light up without delay, to enhance road safety. Instant start no strong currents impact , effectively protecting the car comes with a battery , improving battery life of more than 30%.
3. Fast cooling , the appearance of the most advanced design , thermal structure ingenious and reasonable. Less warranty, power driver with wide voltage constant current mode , the car can respond to a variety of voltage instability , the effective protection of normal use Led efficient and simple structure . Fewer Components damaged, repair the probability is very low , compared with HID ballast repair lower than 80% .
4. Heating temperature is low , protect the car . Xenon working temperature up to 800 ° -1000 ° , the main reason for the car ignition .
5. LED car headlights simple structure, fewer parts than xenon lamps, significantly lower than the xenon lamp failure rates !
6. Automotive LED headlamps color temperature balancing. The Xenon bulbs in the same color to clear , about 6000K-6500K.
1. LED lights than traditional halogen energy, more power.
2. Xenon lamp brightness and proximity , but the LED lights light up without delay, to enhance road safety. Instant start no strong currents impact , effectively protecting the car comes with a battery , improving battery life of more than 30%.
3. Fast cooling , the appearance of the most advanced design , thermal structure ingenious and reasonable. Less warranty, power driver with wide voltage constant current mode , the car can respond to a variety of voltage instability , the effective protection of normal use Led efficient and simple structure . Fewer Components damaged, repair the probability is very low , compared with HID ballast repair lower than 80% .
4. Heating temperature is low , protect the car . Xenon working temperature up to 800 ° -1000 ° , the main reason for the car ignition .
5. LED car headlights simple structure, fewer parts than xenon lamps, significantly lower than the xenon lamp failure rates !
6. Automotive LED headlamps color temperature balancing. The Xenon bulbs in the same color to clear , about 6000K-6500K.
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.