Replacement Motor Reversing & Heater/Dryer Switches For L&R Master Watch Cleaning Machine. This is a set of switches for replacing the missing or broken/damaged original motor reversing & heater/dryer switches on these precision cleaning machines. Will work with L&R Master Watch Cleaning Machines with front panels like the one pictured.  If your machine has front panels like the one pictured and castings like the ones pictured, then these motor reversing & heater/dryer switches should be a perfect replacement.

These switches are industrial grade and will provide you with years of reliable use!  Nice firm action makes it unlikely the switch will be actuated by accident.

Unlike the original motor reversing switches, the motor reversing switch included in this set features a center off position.  This allows you to turn the motor off without needing to adjust the speed controller every time, making cleaning much more convenient! 

Each switch includes the required hardware for mounting the switch to your machine!

It is recommended that you replace each switch one at a time to prevent you from miswiring the machine.

To install your new motor reversing switch, you must unsolder and remove the wiring going to each terminal of the old motor reversing switch (be sure to keep track of which wire goes to which terminal).  Once each connection has been freed, unscrew and remove the mounting nut.  The old motor reversing switch should now be free.  Simply remove the old motor reversing switch and set it aside.  Install the new motor reversing switch as the old one was (if using the screw terminals, be sure to attach the wiring to the reversing switch before mounting it).  Replace and tighten the mounting nut snugly.  Reattaching the leads can be done in one of two ways.  You either screw the wiring to each terminal using the screws, or remove the screws entirely from the terminals and solder the leads onto the terminals of the new motor reversing switch (again, making sure that each lead goes onto the same terminals as they were on the old reversing switch).  There you go!  You have just replaced your motor reversing switch!

To install your new heater/dryer switch, you must unsolder and remove the wiring going to each terminal of the old heater/dryer switch (be sure to keep track of which wire goes to which terminal).  Once each connection has been freed, unscrew and remove the mounting nut.  The old heater/dryer switch should now be free.  Simply remove the old heater/dryer switch and set it aside.  Install the new heater/dryer switch as the old one was (if using the screw terminals, be sure to attach the wiring to the heater/dryer switch before mounting it).  Replace and tighten the mounting nut snugly.  Reattaching the leads can be done in one of two ways.  You either screw the wiring to each terminal using the screws, or remove the screws entirely from the terminals and solder the leads onto the terminals of the new heater/dryer switch (again, making sure that each lead goes onto the same terminals as they were on the old heater/dryer switch).  Good work!  You have replaced your heater/dryer switch!

We also sell these switches separately!  Please see our other items if interested!

By placing an order you understand that it is your responsibility to ensure that this replacement meets your anticipated needs.  I do not accept returns unless the item arrives to you in a condition that is not as described.

This listing is for ONE set of motor reversing & heater/dryer switches only. Pictures of front panel, castings and other parts are for reference only.  If you have any questions please don't hesitate to send me a message!

INTERNATIONAL BUYERS ARE RESPONSIBLE FOR ALL INTERNATIONAL RELATED SHIPPING CHARGES!!!

See my other listings for more L&R watch cleaning machine parts and MORE!