DDS Function Signal Generator
Features:
1. Compact size, complete functions, simple operation, easy to carry.
2. It can be powered by adapter or lithium battery.
3. The good accuracy and frequency stability of DDS are suitable for oscilloscope scanning time factor calibration.
4. Square wave output, suitable for oscilloscope attenuator and probe pulse characteristic adjustment.
5. Together with an oscilloscope, it can be used for electronic circuit test and debugging, frequency characteristics and impulse response test and measurement of audio amplifiers.
1. Compact size, complete functions, simple operation, easy to carry.
2. It can be powered by adapter or lithium battery.
3. The good accuracy and frequency stability of DDS are suitable for oscilloscope scanning time factor calibration.
4. Square wave output, suitable for oscilloscope attenuator and probe pulse characteristic adjustment.
5. Together with an oscilloscope, it can be used for electronic circuit test and debugging, frequency characteristics and impulse response test and measurement of audio amplifiers.
Technical indicators:
1. Frequency range: sine wave 1Hz-500kHz (where the output amplitude is flat to 200 kHz, the output amplitude will decrease as the frequency is further increased), other waveforms 1Hz-50kHz (but the upper limit of the adjustable frequency is not limited, if The requirements for distortion and shaking are not high, and the frequency of use can be further increased).
2. Resolution: 1Hz.
3. Output waveform: sine wave, square wave, triangle wave, forward sawtooth wave, reverse sawtooth wave, electrocardiogram, noise wave.
4. Sine wave distortion: <1% below 1kHz, <0.5% above 1kHz.
5. Output amplitude: maximum ±10V (P-P).
6. Output impedance: 50 ohms.
7. DC offset: maximum ±10V, with shutdown function.
8. All setting parameters can be saved
9. There are filters that can be turned on and off, which can be well adapted to the output of sine and pulse waveforms.
10. Power supply: DC3.7-10V. It is recommended to use DC5V adapter, or 3.7V lithium battery.
Package Included:
1 x DDS Function Signal Generator
1 x USB to DC Power Cable
USB Power Cable
Description:
1. Brand new and high quality
2. 2.1mmx5.5mm DC Power
3. Lenght: 80CM
4. 5V-USB
Package included:
1 x USB 2.0 Male A To DC 5.5mm x 2.1mm Plug DC Power Supply Cord Socket Cable
1. Frequency range: sine wave 1Hz-500kHz (where the output amplitude is flat to 200 kHz, the output amplitude will decrease as the frequency is further increased), other waveforms 1Hz-50kHz (but the upper limit of the adjustable frequency is not limited, if The requirements for distortion and shaking are not high, and the frequency of use can be further increased).
2. Resolution: 1Hz.
3. Output waveform: sine wave, square wave, triangle wave, forward sawtooth wave, reverse sawtooth wave, electrocardiogram, noise wave.
4. Sine wave distortion: <1% below 1kHz, <0.5% above 1kHz.
5. Output amplitude: maximum ±10V (P-P).
6. Output impedance: 50 ohms.
7. DC offset: maximum ±10V, with shutdown function.
8. All setting parameters can be saved
9. There are filters that can be turned on and off, which can be well adapted to the output of sine and pulse waveforms.
10. Power supply: DC3.7-10V. It is recommended to use DC5V adapter, or 3.7V lithium battery.
Package Included:
1 x DDS Function Signal Generator
1 x USB to DC Power Cable
USB Power Cable
Description:
1. Brand new and high quality
2. 2.1mmx5.5mm DC Power
3. Lenght: 80CM
4. 5V-USB
Package included:
1 x USB 2.0 Male A To DC 5.5mm x 2.1mm Plug DC Power Supply Cord Socket Cable
We only accept your Ebay Address, Please Make sure it's 100% right.
The items you ordered will be shipped out in 3 business day by Hong Kong Air Mail when your payment is clear.
We maintain high standards of excellence and strive for 100% customer satisfaction!
Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutralor or negative feedback, so that we can satisfactorily address your concerns.
DDS Function Signal Generator
Features:
1. Compact size, complete functions, simple operation, easy to carry.
2. It can be powered by adapter or lithium battery.
3. The good accuracy and frequency stability of DDS are suitable for oscilloscope scanning time factor calibration.
4. Square wave output, suitable for oscilloscope attenuator and probe pulse characteristic adjustment.
5. Together with an oscilloscope, it can be used for electronic circuit test and debugging, frequency characteristics and impulse response test and measurement of audio amplifiers.
1. Compact size, complete functions, simple operation, easy to carry.
2. It can be powered by adapter or lithium battery.
3. The good accuracy and frequency stability of DDS are suitable for oscilloscope scanning time factor calibration.
4. Square wave output, suitable for oscilloscope attenuator and probe pulse characteristic adjustment.
5. Together with an oscilloscope, it can be used for electronic circuit test and debugging, frequency characteristics and impulse response test and measurement of audio amplifiers.
Technical indicators:
1. Frequency range: sine wave 1Hz-500kHz (where the output amplitude is flat to 200 kHz, the output amplitude will decrease as the frequency is further increased), other waveforms 1Hz-50kHz (but the upper limit of the adjustable frequency is not limited, if The requirements for distortion and shaking are not high, and the frequency of use can be further increased).
2. Resolution: 1Hz.
3. Output waveform: sine wave, square wave, triangle wave, forward sawtooth wave, reverse sawtooth wave, electrocardiogram, noise wave.
4. Sine wave distortion: <1% below 1kHz, <0.5% above 1kHz.
5. Output amplitude: maximum ±10V (P-P).
6. Output impedance: 50 ohms.
7. DC offset: maximum ±10V, with shutdown function.
8. All setting parameters can be saved
9. There are filters that can be turned on and off, which can be well adapted to the output of sine and pulse waveforms.
10. Power supply: DC3.7-10V. It is recommended to use DC5V adapter, or 3.7V lithium battery.
Package Included:
1 x DDS Function Signal Generator
1 x USB to DC Power Cable
USB Power Cable
Description:
1. Brand new and high quality
2. 2.1mmx5.5mm DC Power
3. Lenght: 80CM
4. 5V-USB
Package included:
1 x USB 2.0 Male A To DC 5.5mm x 2.1mm Plug DC Power Supply Cord Socket Cable
1. Frequency range: sine wave 1Hz-500kHz (where the output amplitude is flat to 200 kHz, the output amplitude will decrease as the frequency is further increased), other waveforms 1Hz-50kHz (but the upper limit of the adjustable frequency is not limited, if The requirements for distortion and shaking are not high, and the frequency of use can be further increased).
2. Resolution: 1Hz.
3. Output waveform: sine wave, square wave, triangle wave, forward sawtooth wave, reverse sawtooth wave, electrocardiogram, noise wave.
4. Sine wave distortion: <1% below 1kHz, <0.5% above 1kHz.
5. Output amplitude: maximum ±10V (P-P).
6. Output impedance: 50 ohms.
7. DC offset: maximum ±10V, with shutdown function.
8. All setting parameters can be saved
9. There are filters that can be turned on and off, which can be well adapted to the output of sine and pulse waveforms.
10. Power supply: DC3.7-10V. It is recommended to use DC5V adapter, or 3.7V lithium battery.
Package Included:
1 x DDS Function Signal Generator
1 x USB to DC Power Cable
USB Power Cable
Description:
1. Brand new and high quality
2. 2.1mmx5.5mm DC Power
3. Lenght: 80CM
4. 5V-USB
Package included:
1 x USB 2.0 Male A To DC 5.5mm x 2.1mm Plug DC Power Supply Cord Socket Cable