6 pack of 100mm Bolt down steel fence post shoe support. At 100mm x 100mm, this anchor is used for 100mm / 4" timber posts that are required to be installed onto solid / concrete bases. 

The flush-fitting brown powder-coated bolt-down fence anchor enables posts to be located close to other structures, as the base can be placed tight to one edge. This is especially useful when secure landscape features, such as a pergola, over a patio. 

The fence post is secured in place by tightening the supplied nuts/bolts. For fixing to the ground, you will require some ground anchor bolts (not supplied) - four bolts are required per anchor fitting. To install, simply bolt the anchor to secure it, then slot the post into place. As cement isn't required, you avoid any mess. 

This bolt-down 100mm / 4" fence post support is secured with bolts on the outside of the ‘boot’. Tightening these bolts is what holds the posts in place. If the post rots, you will be able to undo the bolts and slide the post out, then insert a new post and tighten the bolts up again. Please note, you may need to replace the nuts and bolts.