📷DJI Phantom 3 Adv 12.4MP 2.7K 3-Axis Gimbal Camera Parts - OEM for Advanced Drone
📦 In The Box
- •DJI Phantom 3 Advanced Gimbal Camera Assembly Parts × 1
🔍 Product Overview
The DJI Phantom 3 Advanced 3-Axis Gimbal Camera Assembly Parts are exclusive OEM components designed specifically for the DJI Phantom 3 Advanced (Adv) drone. This assembly includes the 12.4MP/2.7K camera and 3-axis stabilized gimbal, delivering high-resolution aerial imaging and smooth footage for professional aerial photography and videography.
⚠️ Strict Compatibility: ONLY for DJI Phantom 3 Advanced (Adv). NOT compatible with Phantom 3 Standard or Phantom 3 Professional (Pro).
📸 Key Parameters
-
•
Compatibility
- •Model-Specific: Only for DJI Phantom 3 Advanced (Adv) (Firmware-compatible; not interchangeable with Phantom 3 Standard/Pro).
- •Mounting Interface: Standardized DJI Phantom 3 gimbal connector (Precision alignment for secure installation).
-
•
Camera Specifications
- •Sensor: 1/2.3-inch CMOS (High-sensitivity for low-light performance).
- •Resolution: 12.4 Megapixels (Still images) / 2.7K (2704×1520 pixels) @ 30fps (Video).
- •Lens: **FOV 94°** (Wide-angle for expansive scenery capture).
- •Image Format: JPEG (Still) / H.264 (Video).
- •Aperture: Fixed f/2.8 (Optimized for aerial clarity).
-
•
Gimbal Specifications
- •Type: 3-Axis (Pitch, Roll, Yaw) Stabilized Gimbal (Eliminates vibrations for smooth footage).
- •Stabilization: ±0.02° precision control (Active stabilization via DJI flight controller).
- •Control Range: Pitch (-90° to +30°), Roll (±30°), Yaw (±300°).
- •Motor Type: Quiet brushless motors (Reduces noise during flight).
-
•
Hardware Design
- •Material: Magnesium alloy frame + anodized aluminum joints (Lightweight yet durable).
- •Protection Rating: IP53 (Dust-resistant and splash-proof for outdoor flights).
- •Operating Temperature: -10°C to 40°C (14°F to 104°F).
- •Weight: Approx. 180g (Including camera and gimbal frame).
-
•
Functional Features
- •Real-Time Image Transmission: 720p HD live feed via DJI Lightbridge (For ground monitoring).
- •Auto-Calibration: Built-in self-calibration for gimbal balance (Ensures optimal performance post-installation).
- •Quick-Release Design: Simplified detachment for maintenance or replacement.
-
•
Software Integration
- •DJI Go App (Legacy): Manual exposure adjustment, white balance control, and gimbal tilt settings.
- •Supported Modes: Follow Me, Waypoint, and Point of Interest (POI) for dynamic shots.
-
•
Certifications & Compliance
- •CE / FCC / RoHS Certified (Meets international safety and electromagnetic standards).
- •DJI OEM Approved (Guaranteed compatibility with Phantom 3 Advanced).
🛠️ Installation & Maintenance
- •Installation Steps:
- 1.Power off the Phantom 3 Advanced drone.
- 2.Remove the old camera/gimbal assembly (If replacing).
- 3.Align the new assembly with the drone’s mounting ports.
- 4.Secure using the provided screws (Tighten to specified torque).
- •Maintenance Tips:
- •Clean the lens and gimbal joints with a microfiber cloth after each flight.
- •Inspect for loose screws or wear every 10 flight hours.
- •Store in a dry, cool place to prevent moisture damage.
📌 Notes
- •Compatibility Reminder: This assembly is exclusively for Phantom 3 Advanced (Adv). Using it on Phantom 3 Standard/Pro will cause malfunctions.
- •Firmware Requirement: Ensure the drone runs the latest firmware for optimal gimbal-camera synchronization.
- •Transportation: Always remove the camera/gimbal assembly when shipping the drone to avoid damage.
