Installation steps:
1. Place the rear camera in the direction as shown in the figure, sure the installation position and angle, and select a suitable installation position from the 3 fixing slots.
2. Pass the screws through the camera metal sheet and bracket from bottom to top as shown in the figure, and tighten them.
3. The installation position on the car is recommended to choose the upper position in the middle of the rear windshield, and wipe the glass with a cleaning cloth.
4. Peel off the double-sided tape and stick it on the rear window glass at an angle as shown in the picture. After confirming the position, press a few times to stabilize the stand.