Product Description

6
6


456
The motor of vacuum former is strategically placed below its perforated stage, which creates a direct downward suction, ensuring the utmost precision.


  • Delivers powerful suction
  • Features a symmetrical heating system
  • Steel rust-resistant body
  • Compact design saves space


  • Package Includes:
  • 1 x Vacuum forming machine
  • 1 x Bag of steel grits
  • 1 x Manual

Dental Vacuum Forming Machine,Compatible with all dental thermoplastics

Durable and user-friendly, the machine will withstand years of rigorous use and prove to be an indispensable tool for any dental office.


  • Decolorization braces forming and production
  • Orthodontic appliances remain, arch molding and plywood production
  • Periodontal disease, fluoride treatment and production of the molding tray
  • Temporary, permanent base, dental care of the molding and production


  • Model: JT-018
  • Voltage: 110V/60Hz ± 10%
  • Power: 600W
  • Dimensions: 25 × 21 × 30cm
  • Forming size:126*126mm
  • Weight: 6kg

1

Firm Sheets Clamp

Sheet clamp with an active limit lock could hold the thermoplastic sheets securely.

2

Safe Push Rod

Special red push rod could safely push the top heating plate away to avoid high temperature burns.

3

Easy and Safe Operation

Separate heating and forming switch easy to use, both with a red indicator attached to prevent misoperation.

4

Fast Heating

Horseshoe-shaped heating tube is evenly distributed in the center, with the honeycomb heat-dissipating net, the thermoplastic sheet can be uniformly heated to accelerate the softening speed.

5

HOW TO USE Dental Vacuum Forming Machine


  1. Put the plaster model on the tray.Use steel balls to bury the part that do not need to be formed.
  2. Set up the PVC film.Raise the PVC film clamp to working height.Turn on the heater by using heating button.
  3. When the PVC film becomes soft enough (usually it will sag 1 to 2cm),press down the lifting rod to cover the heated PVC film over the plaster model.
  4. Turn off the heater.Press down the molding button and wait for 10 to 15 seconds.Molding finish.
  5. After the PVC film cooling down,use a scissor to remove the excess part.
Datacaciques