Features:
1. Compact size, powerful performance: Combines a digital fluorescent oscilloscope, full-featured signal generator, spectrum analyser, and frequency response analyser in one unit.
2. High-voltage burn protection: The front-end input design features a high-voltage-resistant design, ensuring it can withstand over 400V at any setting without being damaged.
3. QC Fast Charging Function: Built-in 3.7V/8000mAh polymer lithium battery with integrated QC 2.0 protocol, supporting up to 18W charging. Fully charged, it can operate continuously for 3 hours.
4. High-Resolution Mode: Supports up to 16-bit resolution. High-resolution mode effectively removes noise components, offering optimal signal detection and display capabilities, aiding in the analysis of signal details and characteristics.
5. Dual-channel input design: Features two input channels with an input impedance of 1MΩ (18pF), enabling simultaneous measurement of two different signal groups.
6. One-button waveform screenshot saving: Built-in 1Gbit storage space, capable of storing up to 90 images or 500 waveform groups, allowing for secondary analysis of saved signals.
7. Full-featured signal generator: Can output 14 types of waveform signals, with adjustable output frequency up to 50 MHz, amplitude 0-5 V, offset +2.5 V, and duty cycle 0.1%-99.9%. Features a unique clipping output function, capable of storing up to 500 custom signals.
1. Compact size, powerful performance: Combines a digital fluorescent oscilloscope, full-featured signal generator, spectrum analyser, and frequency response analyser in one unit.
2. High-voltage burn protection: The front-end input design features a high-voltage-resistant design, ensuring it can withstand over 400V at any setting without being damaged.
3. QC Fast Charging Function: Built-in 3.7V/8000mAh polymer lithium battery with integrated QC 2.0 protocol, supporting up to 18W charging. Fully charged, it can operate continuously for 3 hours.
4. High-Resolution Mode: Supports up to 16-bit resolution. High-resolution mode effectively removes noise components, offering optimal signal detection and display capabilities, aiding in the analysis of signal details and characteristics.
5. Dual-channel input design: Features two input channels with an input impedance of 1MΩ (18pF), enabling simultaneous measurement of two different signal groups.
6. One-button waveform screenshot saving: Built-in 1Gbit storage space, capable of storing up to 90 images or 500 waveform groups, allowing for secondary analysis of saved signals.
7. Full-featured signal generator: Can output 14 types of waveform signals, with adjustable output frequency up to 50 MHz, amplitude 0-5 V, offset +2.5 V, and duty cycle 0.1%-99.9%. Features a unique clipping output function, capable of storing up to 500 custom signals.
Specifications
Product Name: Four-in-One Multi-Function Tablet Oscilloscope
Product Model: DPOS350P
Expansion Interface: USB Transfer Interface
Total Power Consumption: 10W
Screen Resolution: 1024x600 High Resolution
Firmware Upgrade: Supports ISO Image Upgrade
Charging Requirements: QC 18W-12V/1.5A
Battery Specifications: 3.7V/8000mAh
Interaction Method: Capacitive Touchscreen
Dimensions: 190mm x 128mm x 37mm
Oscilloscope Parameters
Number of Channels: 2
Input Impedance: 1MΩ/14PF
DC Accuracy: ±2%
High-Resolution Mode: 8-bit to 16-bit
Analogue Bandwidth: 350MHz
Time base range: 5 nS to 50 S
Time accuracy: ±0.01%
Parameter measurement: 12 types
Rise time: 1 nS
Rolling time base: 50 mS to 50 S
Input coupling: DC/AC
Cursor measurement: Time, period, frequency, level, voltage
Maximum sampling rate: 1 GSPS
Vertical sensitivity: 2 mV to 20 V
Probe Gain: 1X/10X/100X
Trigger Detection: Digital Trigger
Storage Depth: 60Kpts
Vertical Range: 16mV to 160V
Hardware Bandwidth Limit: 150M/20M
Trigger Channels: CH1/CH2
Signal Generator Parameters
Waveform types: 14 standard functions + clipping
Frequency: 0 to 50 MHz (only sine wave; other waves up to 10 MHz/5 MHz/3 MHz)
Amplitude: 0 to 5 Vpp
Offset: -2.5 V to +2.5 V
Duty cycle: 0.1% to 99.9%
Frequency resolution: 1 Hz
Amplitude resolution: 1 mV
Offset Resolution: 1 mV
Duty Cycle Resolution: 0.1%
Custom Truncation: 500 groups
Frequency Response Analyser
Excitation Signal Frequency: 100 Hz to 50 MHz
Excitation Signal Amplitude: 0 to 5 VPP
Excitation Signal Offset: -2.5 V to +2.5 V
Excitation Frequency Count: 20 to 500
Cursor Measurement: Frequency/Gain/Phase
Operating mode: Single/Loop
System calibration: Supported
Spectrum analyser
Conversion method: FFT
FFT length: 4K to 32K
Frequency range: 200 kHz to 350 kHz
Level range: -60 dBmV to +260 dBmV
Cursor measurement: Frequency/Amplitude
Marking parameters: Highest energy harmonic
Waterfall diagram: Supported
3D Waterfall Diagram: Supported
Automatic Adjustment: Supported
System Calibration: Supported
PACGING List:
Main Unit ×1
Colour Box ×1
Manual ×1
350M Probe ×2
QC18W Charger ×1
USB Data Cable ×1
Alligator Clip Cable ×1
Manual ×1
We only accept your Ebay Address, Please Make sure it's 100% right.
The items you ordered will be shipped out in 3 business day by Hong Kong Air Mail when your payment is clear.
We maintain high standards of excellence and strive for 100% customer satisfaction!
Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutralor or negative feedback, so that we can satisfactorily address your concerns.
Features:
1. Compact size, powerful performance: Combines a digital fluorescent oscilloscope, full-featured signal generator, spectrum analyser, and frequency response analyser in one unit.
2. High-voltage burn protection: The front-end input design features a high-voltage-resistant design, ensuring it can withstand over 400V at any setting without being damaged.
3. QC Fast Charging Function: Built-in 3.7V/8000mAh polymer lithium battery with integrated QC 2.0 protocol, supporting up to 18W charging. Fully charged, it can operate continuously for 3 hours.
4. High-Resolution Mode: Supports up to 16-bit resolution. High-resolution mode effectively removes noise components, offering optimal signal detection and display capabilities, aiding in the analysis of signal details and characteristics.
5. Dual-channel input design: Features two input channels with an input impedance of 1MΩ (18pF), enabling simultaneous measurement of two different signal groups.
6. One-button waveform screenshot saving: Built-in 1Gbit storage space, capable of storing up to 90 images or 500 waveform groups, allowing for secondary analysis of saved signals.
7. Full-featured signal generator: Can output 14 types of waveform signals, with adjustable output frequency up to 50 MHz, amplitude 0-5 V, offset +2.5 V, and duty cycle 0.1%-99.9%. Features a unique clipping output function, capable of storing up to 500 custom signals.
1. Compact size, powerful performance: Combines a digital fluorescent oscilloscope, full-featured signal generator, spectrum analyser, and frequency response analyser in one unit.
2. High-voltage burn protection: The front-end input design features a high-voltage-resistant design, ensuring it can withstand over 400V at any setting without being damaged.
3. QC Fast Charging Function: Built-in 3.7V/8000mAh polymer lithium battery with integrated QC 2.0 protocol, supporting up to 18W charging. Fully charged, it can operate continuously for 3 hours.
4. High-Resolution Mode: Supports up to 16-bit resolution. High-resolution mode effectively removes noise components, offering optimal signal detection and display capabilities, aiding in the analysis of signal details and characteristics.
5. Dual-channel input design: Features two input channels with an input impedance of 1MΩ (18pF), enabling simultaneous measurement of two different signal groups.
6. One-button waveform screenshot saving: Built-in 1Gbit storage space, capable of storing up to 90 images or 500 waveform groups, allowing for secondary analysis of saved signals.
7. Full-featured signal generator: Can output 14 types of waveform signals, with adjustable output frequency up to 50 MHz, amplitude 0-5 V, offset +2.5 V, and duty cycle 0.1%-99.9%. Features a unique clipping output function, capable of storing up to 500 custom signals.
Specifications
Product Name: Four-in-One Multi-Function Tablet Oscilloscope
Product Model: DPOS350P
Expansion Interface: USB Transfer Interface
Total Power Consumption: 10W
Screen Resolution: 1024x600 High Resolution
Firmware Upgrade: Supports ISO Image Upgrade
Charging Requirements: QC 18W-12V/1.5A
Battery Specifications: 3.7V/8000mAh
Interaction Method: Capacitive Touchscreen
Dimensions: 190mm x 128mm x 37mm
Oscilloscope Parameters
Number of Channels: 2
Input Impedance: 1MΩ/14PF
DC Accuracy: ±2%
High-Resolution Mode: 8-bit to 16-bit
Analogue Bandwidth: 350MHz
Time base range: 5 nS to 50 S
Time accuracy: ±0.01%
Parameter measurement: 12 types
Rise time: 1 nS
Rolling time base: 50 mS to 50 S
Input coupling: DC/AC
Cursor measurement: Time, period, frequency, level, voltage
Maximum sampling rate: 1 GSPS
Vertical sensitivity: 2 mV to 20 V
Probe Gain: 1X/10X/100X
Trigger Detection: Digital Trigger
Storage Depth: 60Kpts
Vertical Range: 16mV to 160V
Hardware Bandwidth Limit: 150M/20M
Trigger Channels: CH1/CH2
Signal Generator Parameters
Waveform types: 14 standard functions + clipping
Frequency: 0 to 50 MHz (only sine wave; other waves up to 10 MHz/5 MHz/3 MHz)
Amplitude: 0 to 5 Vpp
Offset: -2.5 V to +2.5 V
Duty cycle: 0.1% to 99.9%
Frequency resolution: 1 Hz
Amplitude resolution: 1 mV
Offset Resolution: 1 mV
Duty Cycle Resolution: 0.1%
Custom Truncation: 500 groups
Frequency Response Analyser
Excitation Signal Frequency: 100 Hz to 50 MHz
Excitation Signal Amplitude: 0 to 5 VPP
Excitation Signal Offset: -2.5 V to +2.5 V
Excitation Frequency Count: 20 to 500
Cursor Measurement: Frequency/Gain/Phase
Operating mode: Single/Loop
System calibration: Supported
Spectrum analyser
Conversion method: FFT
FFT length: 4K to 32K
Frequency range: 200 kHz to 350 kHz
Level range: -60 dBmV to +260 dBmV
Cursor measurement: Frequency/Amplitude
Marking parameters: Highest energy harmonic
Waterfall diagram: Supported
3D Waterfall Diagram: Supported
Automatic Adjustment: Supported
System Calibration: Supported
PACGING List:
Main Unit ×1
Colour Box ×1
Manual ×1
350M Probe ×2
QC18W Charger ×1
USB Data Cable ×1
Alligator Clip Cable ×1
Manual ×1