Purchase Steps:
(Note: This Step Cannot Be Ignored Before Purchasing)
First, Find The Select Vehicle Button At The Top Of The Page And Enter Your Vehicle (Year, Brand, Model, Trim, Engine)
Then Enter And Add To Show If The Part You Purchased Is Suitable For Your Vehicle. Especially Need To See The Vehicle Note
If You Are Not Sure About Your Vehicle Configuration, You Can Tell Us Your Vehicle Vin And We Will Try Our Best To Answer Your Questions
1.Fitting the Following vehicle:
2008-13 Nissan Rogue Steering & Suspension Kit
2014-15 Nissan Rogue Select Steering & Suspension Kit
2.Package Includes:
1x Part # Front Control Arm - K621452
1x Part # Front Control Arm - K621453
1x Part # Tie Rod End- ES800582
1x Part # Tie Rod End - ES800583
3.Note
Although some parts have grease fittings, other parts are factory sealed, but do not affect the fit and quality of the parts.Please check above compatibility list to make sure it fits your vehicle.
If you want to find more about suspension kits,clicking Our Store
Frequently Asked Questions
(1).What's the function of control arm?
The control arm connects the hub and the frame of the car. There are ball joints on the hub side and bushings on the frame side to achieve up and down instead of forward and rearward.
(2).What is the significance of the control arm for the car?
As an important part of the car suspension, the control arm is used to transmit the required supporting force of the wheel and to withstand all the front and rear direction stresses. It is an important safety part of the chassis system. Therefore, it requires high strength and reliability in the design. Its fatigue strength is directly related to the safety of vehicles and members.
(3).How to tell the quality of control arm?
Look at the materials and processing of the control arm: the materials used to control the arm, common are steel and aluminum alloy. In ordinary family cars, steel control arms are very common, and the basic appeal is to meet the strength while controlling costs. In the middle and high-end models, you will see the control arm of the aluminum alloy and the wheel bearing housing. In addition to meeting the strength of the suspension, this material can further reduce the weight and reduce the weight of the suspension spring to improve the suspension response. Improve driving performance.
Look at chassis protection and workmanship: Regarding chassis protection, we mainly pay attention to whether it is equipped with engine under guard, whether there is coating or cover at the bottom of the car body, whether the oil pipe is covered with a guard plate, whether the front and rear wheel arches are protected. Board or coating coverage, etc.
(4).Do I need to replace the control arm if the bushings are worn? What is the safety risk?
Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm.
(5).What is the average cost of replacing control arms?
The cost to replace control arms depend on the vehicle. Control arms cost different amounts depending on the vehicle, as well as the labor to install. Some are easy to install and take little time, while others can take several hours.
