Product Description:
Fits:This is Bonnet and Poppet Assembly Kit replaces for 765 1” and 1-1/4” Pressure Vacuum Breaker Valve and Backflow Preventer.
Cross reference:905-212.
Material:Made of quality plastic and rubber,Designed to be installed to provide protection on 765 series Pressure Vacuum Breaker.
Easy to install:Please apply the included grease on both thread of the bonnet and bronze valve.Use proper tool to tighten if needed.
Package Includes:1 x Nut,Bonnet Assembly (o-ring, spring, e-ring, washer, stem),Poppet Assembly (rubber disk, poppet)


Step：

1.Close the outlet shutoff valve,then close the inlet shutoff valve,drain the residual water completely. Then unscrew the top nut and release the brass canopy. Take out the old Bonnet & Poppet parts and dispose.
2.Put the new poppet inside the chamber.Unscrew the nuts from the bonnet copper column,then hand tighten the bonnet part clockwise into the vacuum breaker(Apply grease on threading if needed.) Place the canopy onto the secured bonnet part by put bonnet column through the canopy hole. Tighten the top nuts back to secure the canopy.
3.Open the inlet ball valve to pressurize the device,temporary "splash"is normal,the "splash"will auto shutoff once the device is fully pressurized.Then slowly open the outlet ball valve to fill the downstream line.