Anker 100W USB-C Portable Charger with 25000mAh Power Bank Built-in Cable
- Triple 100W USB-C Ports for Multi-Device: Designed for multitaskers, featuring three USB-C ports each delivering up to 100W, allowing you to power a MacBook and other devices simultaneously without losing charging speed.
- 25,000mAh for Long-Haul Power: Set off on extended journeys with a huge 25,000mAh capacity that supports your devices through multiple uses, complete with 100W ultra-fast recharging that fuels the power bank to 30% in just 20 minutes.
- Dual Built-In Cables for On-the-Go Use: Equipped with two USB-C cables, one extendable up to 2.3 ft for over 20,000 retractions, and another at 0.98 ft that acts as a durable carrying strap capable of enduring more than 20,000 bends.
- Charge 4 Devices at Once: Never run out of power, whether you're charging smartphones, tablets, or other USB-enabled devices. Connect up to four at once thanks to dual USB-C Cables, a USB-A port, and a USB-C port.
What You Get:
Why is my power bank providing fewer charges than expected?
Energy loss during charging due to inefficiencies in battery cells and circuitry results in a 30% to 45% capacity reduction. A fully charged Anker 25,000mAh power bank typically delivers about 13,750 to 17,500mAh.
How can I estimate the number of charges for my device?
To estimate the number of charges, use this formula: (Power Bank Total Capacity × 0.65) ÷ Device Battery Capacity. For example, a device with a 3,349mAh battery can receive approximately 4.8 charges from a 25,000mAh power bank.
How long does it take to recharge the power bank?
The recharge time depends on the charger's power and the ambient temperature. Using a 100W or higher charger at 77°F (25°C), it typically takes about 2 hours to fully recharge the power bank.
Does it support pass-through charging?
Yes, the power bank supports pass-through charging. However, it requires a charger rated at 20W or higher, and the input power must exceed the output power to enable this feature.
Is it normal for the power bank to display "No Recharging Mode"?
Yes, this is normal. When the power bank discharges at high power, its temperature increases. For safety, the protection mechanism temporarily delays recharging until the temperature lowers, but it will continue to discharge during this period.