Feature
This Tip Fits Pipes From 1.5" to 2.1" (38-54mm) Pipe Diameter.
Made of Stainless Steel, Corrosion Resistance and Durability.
Black Tone and Smooth Surface, Decor You previous Exhaust Pipe Brighter and Newer.
This Muffler Tip Can Not Only Reduce Exhaust Noise, Also Can Release The Exhaust Gas Safely and Effectively.
Simple Installation, No Need Drilling or Welding, Fixed by three Screws(Included).
Please check your previous tailpipe's type. Straight tailpipe is for straight type, and curved tailpipe is for curved type. This is a universal model exhaust pipes.
This Tip Fits Pipes From 1.5" to 2.1" (38-54mm) Pipe Diameter.
Made of Stainless Steel, Corrosion Resistance and Durability.
Black Tone and Smooth Surface, Decor You previous Exhaust Pipe Brighter and Newer.
This Muffler Tip Can Not Only Reduce Exhaust Noise, Also Can Release The Exhaust Gas Safely and Effectively.
Simple Installation, No Need Drilling or Welding, Fixed by three Screws(Included).
Please check your previous tailpipe's type. Straight tailpipe is for straight type, and curved tailpipe is for curved type. This is a universal model exhaust pipes.
Note :
The distance between the tail pipe and the bumper should be above 2cm to avoid scalding by hot exhaust bumper.
Wear gloves to install, just in case injury.
In the car just stopped or started, please do not install this product, to avoid being scalded.
Specifications:
100% Brand New and High Quality
Color: Black
Type:Single tailpipe - Straight Cut
Material: Stainless Steel
Size: 3.9 * 2.4 * 3.3 in (100 * 63 * 85mm)
Diameter: 2.4 in (63mm)
Length: 3-7/8 in(100mm)
Suitable For car exhaust pipe diameter Less than 54mm(2.1in)
Package includes:
1 * Car Exhaust Tail Pipe
*Special design
The small drainage hole design can prevent water accumulation.
The small drainage hole design can prevent water accumulation.
*Installation steps:
1.Clean the tailpipe surface
2.Putting the exhaust tip on
3.Fasten the exhaust tip
1.Clean the tailpipe surface
2.Putting the exhaust tip on
3.Fasten the exhaust tip
Installation steps:
1.Clean off the tailpipe and exhaust tip with penetrating oil and a shop rag.
2.Try to slide the tip onto the exhaust pipe. You will probably meet some resistance,use auto grease to lubricate the pieces if necessary.
Cover the end of the exhaust tip with a towel and tap it into a place with a rubber mallet.
3.Finish the installation according to the specific fastener style you chose.Tighten screws and clamps to secure the exhaust tips.
*Finish the installation according to the specific model.
2.Try to slide the tip onto the exhaust pipe. You will probably meet some resistance,use auto grease to lubricate the pieces if necessary.
Cover the end of the exhaust tip with a towel and tap it into a place with a rubber mallet.
3.Finish the installation according to the specific fastener style you chose.Tighten screws and clamps to secure the exhaust tips.
*Finish the installation according to the specific model.