Feature：
-- Made of synthetic resin, strong adhesion, good flexibility, pollution-free, environmentally friendly, and does not contain irritating chemicals.
-- These glue sticks are designed for use with any high-temperature or dual-temperature hot glue gun to adhere objects to heavy-duty media like metal or wood.
-- After heating, the non-toxic and smooth hot solution is easy to use and efficient, has no peculiar smell, is anti-aging and can be stored for a long time, 7mm glue stick is suitable for small glue guns below 30W.
-- Used for bonding wood, metal, glass, fabric, floral foam, paper, plastic, cardboard, ceramics and card, etc. Perfect for crafting, DIY and home office repairs, decorating school projects and more.

Specification:
Color: transparent white
Material: synthetic resin
Softening point: 76℃±3℃
Curing time: 30-40s
Opening hours: 10-12s
Melting viscosity: 150℃-25000 CPS±1000 CPS
Operating temperature: 150℃-180℃
Shear strength: about 190N/cm² (metal interface)
Size: 7mmx200mm


This hot melt glue gun super strong adhesive is ideal for crafts, floral, plastic, glass, ceramic, rubber, leather and many other DIY projects. High quality EVA glue sticks for better bonding to metals, plastic and ceramic items.

Specification:
Power:20W
Preheat time: 3 minutes
Voltage: 110V-220v

Features:
Handy and lightweight, comfortable to hold in hand.
Heats quickly (3-5mins), no waste of time.
Easy operation, 2 finger trigger, moves up and down in an arc.   
Wide application in handcraft and repair job.
 

  

Warm tips:
1. Keep clean of the glue sticks to avoid impurity blocking the nozzle, and do not pull out left over glue sticks from hot glue gun after each time using.
2. To avoid getting an electric shock during use, do not use in humid or wet environment and keep the working hot glue gun away from children.
3. Please preheat the hot glue gun for 3 minutes before using and please don't touch the nozzle and glue liquid when the gun is working.
4. The remaining pressure inside the glue gun will push a little melted glue out of the gun even stop using. To save your glue, please control release the trigger or cut off the power in advance.
5. If you don't need to use the glue gun anymore above 15 min, please cut off the power to avoid the melting glue recirculating or damage.

6. Cut off the power when stop using the glue gun, and never try to disassemble the melt glue gun in any case.


paintless dent repair kits Feature:

Widely Used: Paintless Dent Puller Kit can be used for the car dent and any other metal surface like refrigerator, washing machine, etc.

Professional Dent Repair Kit: The Golden dent lifter specifically designed can adjust small dent and big dent , 18pcs different shape and size pulling tabs which are supplied for fixing various shapes of dents.

Glue Gun: DIY Carfts Making & Home or Office Quick Repairs.

Easy to Use: Dent Removal Kit lets you repair the dents anywhere anytime by your self,since the accessories of Paintless Dent Repair are not complicated at all.

High Quality: These dent puller kit made from high quality metal and plastic that is durable enough to last you several years.

Note: If the operation would not succeed, please operate repeatedly.

1.Select a suitable gasket and then apply glue to the drawing gasket with glue gun.

2.Fast place the drawing gasket, press lightly until the glue cures and adheres (let the glue cool for about 5 minutes).

3.Mount our puller and pull up the dent until the dent disappears.

4.Spray some alcohol and clean the repaired place with a plastic spatula. 



How to use this paintless dent repair kits:

1. Clean the dent with a clean wet cloth;

2. Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;

3. Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is);

4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);

5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);

6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;

7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;

8. Clean the repaired place with a clean wet cloth.