Explanation working mode:

1: Self-locking: Press same remote control button, press once to turn then press again to turn

2: Interlock: There is a two-button remote control, press “ON” button to turn press “OFF” to turn

3:Jog: Press remote control button to turn release remote control button to turn If you keep pressing

remote control button, will keep When to release remote control button when to turn

Remote control pairing learning

1. Inching: Press Learning Button once, an indicator flashes once; then press button remote controller

whose function Learning Button needs to study, learning succeeds if indicator flashes three times goes

2. Self-locking: Press Learning Button twice a indicator flashes twice goes then press

button remote controller whose function Learning Button needs to study, learning succeeds if its indicator

flashes three times goes

3. Interlocking: Press Learning Button three times a indicator flashes three times goes then

press button remote controller whose function Learning Button needs to study, indicator flashes three

times goes press another button remote controller whose function Learning Button needs to study,

indicator flashes three times goes eventually, learning succeeds.

4. Power failure output saving mode: (In case power failure during working mode prior to power failure

can resume soon power recovers.) After remote controller succeeds learning Self-locking or

Interlocking mode, press Learning Button four times a indicator flashes six times remains

then press button once that succeeded learning Self-locking or Interlocking mode, indicator

flashes three times goes eventually, learning succeeds.

5. Countdown setting seconds: After remote controller succeeds learning Inching mode, press Learning

Button six times a indicator flashes six times remains then press button that

succeeded learning Inching mode, indicator flashes once upon each press, countdown is set to

Ten presses are required if countdown is set to ten seconds. Press Learning Button once or wait

six seconds to quit setup procedure, eventually, learning succeeds. maximum countdown is 255

seconds.

6. Countdown setting minutes: After remote controller succeeds learning Inching mode, press Learning

Button times a indicator flashes times remains then press button that

succeeded learning Inching mode, indicator flashes once upon each press, countdown is set to

minute. Ten presses are required if countdown is set to ten minutes. Press Learning Button once or wait

six seconds to quit setup procedure, eventually, learning succeeds. maximum countdown is 255

minutes.

7. Countdown setting hours: After remote controller succeeds learning Inching mode, press Learning Button

ten times a indicator flashes ten times remains then press button that succeeded inlearning Inching mode, indicator flashes once upon each press, countdown is set to hour. Ten

presses are required if countdown is set to ten hours. Press Learning Button once or wait six seconds to

quit setup procedure, eventually, learning succeeds. maximum countdown is 255 hours.

No matter countdown is set seconds, minutes or hours, can be added instance, if

countdown is set to ten seconds, ten minutes ten hours successively, eventually total countdown is added

to ten hours, ten minutes ten seconds.

To clear data:

1 .Clear setting:press learning button 16 times succession, indicator flashes 16 times then

flashing 5 times, setting is successfully cleared, jog mode is retained.

2 .Clear settings: Press hold learning button without releasing your hand 8 seconds, will be

settings are successfully cleared

Package includes:

1 x

2 x Remote control