Accessories Overview

• 1* Base
• 1* Chuck
• 1* Chuck Wrench
• 3* chuck counter jaws
• 1* Spindle rod
• 1* Spindle Bearing Housing
• 1* XL44 tooth synchronous wheel
• 1* XL20 tooth synchronous pulley
• 1* XL180 belt
• 1* 750W 110V Brushless Servo Motor
• 1* Brushless servo motor driver

Advantages:

• Spindle assembly with 750w brushless motor, running very quietly, great torque, with brake function, aluminium profile base, easy to install by yourself and later later replacement of synchronous belt, very reasonable design.
• 45mm through-hole design, with a brushless motor that supports forward and reverse rotation, rotational speed display, and stepless speed regulation, this polishing machine diy is very playable and thick, it is enough for polishing and grinding metal.

Chuck clamping range

• Chuck diameter: 160mm/ 6.3 inches
• Internal jaw clamping range: 3-55mm/ 0.118-2.17 inches
• Internal jaw jamming range: 50-160mm/ 1.97-6.3 inches
• External jaw clamping range: 55-145mm/ 2.17-5.71 inches
• Maximum speed: 3600R/min
• Maximum input torque: 160N.m
• Maximum static clamping force: 24KN
• Through hole: 45mm/ 1.77 inches
• Screws: M8
• Small concentricity error, concentricity less than 0.03mm, suitable for high-precision machining
• K11 chuck jaws for the separation of jaws form, can be adjusted for positive or negative jaws to use

Feaures

• Pure Copper Motor
• Metal Gear
• Strong power
• Efficient heat dissipation
• Infinitely adjustable speed
• Self-locking switch
• Dust shield
• Multi-angle grinding
• Wear-resistant and durable
• Support one-key forward and reverse rotation, support soft start (both start and stop ease).
• The motor output shaft has 15mm thread, which can be equipped with synchronous pulley and ER special chuck, which is widely used in belt sander, polishing machine, small lathe, milling machine, etc.
• Pure copper motor, strong power and efficient heat dissipation.
• Strong anti-interference ability, low noise, with multiple protections such as overcurrent, overload and overvoltage.

Purpose of each button:

• F : Enter parameter combination key; combined with other keys to enter parameter setting mode, error recovery key
• D: Direction switching; the main function is to switch directions and confirm parameter settings
• + : Increase motor speed; adding keys to parameter and index values
• - : Reduce motor speed; parameter and index value decrease key

Adjustment method for technician mode parameters:

• a) Press and hold the "F" key while pressing the "+" key, and the screen will display as P-00;
• b) Press the "+" or "-" keys to adjust the parameter number;
• c) Press the "F" key to enter the parameters, and the screen will display the parameter values;
• d) Press the "+" or "-" keys to adjust to the desired parameter value;
• e) Press the "D" key to save the parameters and exit.

Restore factory settings:

• While holding down the "F" key, press the "+" key once, and the screen will display as P-00. Then, hold down the "D" key for 3 seconds and release it.