Car Headlight & Taillight & Fog Light Lamp wrap Film Smoke Black TPH PU PPF Protective Film For Car Styling Motorcycle Decorate

Features:

100%  New. Waterproof, Smooth Surface.

Stretchable, Scratch Resistan Item.

Self-Adhesive. Easy Removal with No Residual

Suitable for Any Headlights, Fog Lights, Side Marker lights or Body paint surface, etc(DIY)

Material :TPH-PU

Size:

30CM x 1M, 30CM x 1.5M, 30CM x 2M, 30CM x 3M,

40CM x 1M, 40CM x 1.5M, 40CM x 2M, 40CM x 3M,

Width 11.8/15.7INCH x Length 3.3/6.6/9.9FT

(Suitable size of general car headlights: 1.5m. If your car headlight size is too long, please select 2 meters)

Color:

Dark black(Transmittance:15%) /  Dark brown(Transmittance:44%) ,

Transparent(Transmittance:85%)  /  Light black(Transmittance:30%),

Matte black(Transmittance:20%) /  Light blue(Transmittance:67%),

Red(Transmittance:17%)   /  Yellow(Transmittance:75%),

Light grey(Transmittance:47%)  /  Light gray brown(Transmittance:54%)

(Color names are just a way of calling. Based on the actual color）

(Due to the difference between different monitors, the pictures may not reflect the actual color of the item)

Installation Tip :

Step1:prepare the spary bottle (water and 1 drop shower gel or with water and neutral shampoo),rag and scraper ,to totally clean the application area.

Step2:remove the film and spray it with a certain amount of water on the sticky side .

Step3:Align the holes first which will help to align the whole piece film.

can be stretch and stick to the lights.

Step4:Scrape the water and air bubbles out from center to corner by using a scraper.

Step5:Cut off excess film.Use a heat gun,hair dryer,or lighter to flatten and affix the uneven place.

Package Contents:

1 x  Piece film