PLA+ FILAMENT  Specially Design for 3D Printing

 

 

 

 

Technical Specifications

• Density: 1.25g/Cm³
• Melt Index: 10(190°C/2.16kg)g/10min  
• Tensile Strength（X-Y): ≥ 60mpa
• Elongation At Break（X-Y): 23%
• Bending Strength:80mpa
• Bending Modulus:1911mpa
• Charpy Impact Strength:9j/M²
• Thermal Deformation Temp: 53°C(0.45mpa)
• Fan: 100%
• Line Length: (1.75mm) 330-335m
• Rockwell Hardness: 88
• Print Layer Thickness: 0.2mm
• Recommended Extrusion/Nozzle Temp: 200~230°C(Recommended 215°C)
• Recommended Heated Bed Temp: 50-65°C
• Printing Speed: 30-70mm/S
• Recommendation Platform: PEI/Glass/Fiberglass Board+Pvp Glue Stick Or Textured Paper