Item Description:
Material: PET
Fitment Type: One Way Mirror Tint Window Film
Colour: Blue
Visible Light Trans:20%
Solar Protection: 99% UV Rejection
Heat Rejection: 50%
Application: Car, bedroom, balcony, kitchen, office, etc.
Size: 50cm*100cm (20in * 39in)
50cm*200cm (20in * 79in)
50cm*300cm (20in * 118in)
50cm*400cm (20in * 157in)
50cm*500cm (20in * 197in)
Feature:
1. UV Rejection & Anti Glare: Our window film privacy can not only block out 85% of infrared rays and 99% of UV rays to make protect your skin, prevent interior furnishings from premature fading, but also bloque strong light to create a comfortable environment full of gentle light for you. Also provide heat reduction in the summer and retains heat in the winter.
2. Heat Reflective & Energy Saving: Our reflective window film is designed with a mirror effect outside which can reflect some of the heat back, reduce the amount of heat transmitted through your window glass, an instant and economical way to reduce glare and give you and your family a more comfortable indoor space.
3. Wide Application: Our window privacy film can be applied to any flat, clean, and smooth glass surfaces. For example, One-way privacy window film can be used in commercial buildings, kitchen, sliding doors, living rooms, bedrooms, office, waiting areas, attics, enclosed porches, and anywhere with glass windows where you want to block UV light or intense heat. (Not applicable to double-paned glass)
Installation Instructions:
1. Thoroughly clean the window the film will be applied to.
2. Cut your film to size of the window, adding an extra 2cm to the width and height.
3. Remove the clear lining film from back of the window film and spray the adhesive back of the film, as well as your fingers, with the soapy water solution. (Tip: If you cannot remove the clear lining film, attach a piece of sticky tape to either side of the film at one corner and peel away from each other).
4. Spray the glass with the soapy water.
5. Apply the adhesive side of the film onto the glass and slide into position.
6. Spray the face of the film with the soapy water and using a squeegee or credit card wrapped in paper towel, squeegee out all the soapy water from behind the film.
7. Trim off any excess film using a sharp knife for a neat finish.
Note:
The different effects between daytime and night:
The outside glass will show a mirror effect as well as keep your privacy during the daytime (If the people outside who is up close, it’s not completely invisible to the inside). At night, the outdoor glass will lose the mirror effect, and people outside can see Inside. Therefore, curtains are necessary at night.
（Reasons: The side with stronger light will have a mirror-like appearance, while the other side will be see-through.
This means when indoor light is stronger than outdoor, people outside can see people inside. In general, people outside can't see people inside during the daytime）
1.Due to the light and screen setting difference, the item's color may be slightly different from the pictures.
2.Please allow slight dimension difference due to different manual measurement.
3.Please feel free to contact us if you have any questions.
