FITMENT: For 2003-2010 F-250-550 Super Duty, For 2004-2010 E-350 Super Duty, For 2003-2005 Excursion, For 2004-2005 E-350 Club Wagon, For 2004-2010 E-450 Super Duty, For 2000-2008 F650/F750.More vehicle models in the product description.
REPLACE PART NUMBER:FL2016,3C3Z-6731-AA,1840752C91,PF1704,P7235,CH9549,57311,P550528,LF16166,ML1034.
SUPERIOR FILTRATION MEDIA:Optimally screening out 98% of abrasives such as carbon, sand, dust and bits of metal before they get into your oil.Helps protect against engine wear.Protect your engine and keep your emissions control systems working properly.
Pressure-relief valves:Help minimize the chance of dirty oil circulating back into the engine.Help maintain the supply of oil to the engine under extreme cold conditions or if the filter gets clogged.Anti-drain back valves help prevent oil from draining out of the filter and engine when the engine is not running and resist the aging effects that an engine’s high heat can cause.
UNIQUE ELEMENTS:Allow for eco-friendly disposal of used filters through biodegration, reducing impact on landfills.
Package Includes: 1 * FL2016 Oil Filter.
Compatibility With:
For 2012-2013 1300 FBC L6-7.6LE-350 Super Duty 2004-2010 6.0L
For E-350 Club Wagon 2004-2005 6.0L
For E-450 Super Duty 2004-2010 6.0L
For Excursion 2003-2005 6.0L
For F250 Super Duty 2003-2007 6.0L/2008-2010 6.4L
For F350 Super Duty 2003-2007 6.0L/2008-2010 6.4L
For F450 Super Duty 2003-2007 6.0L/2008-2010 6.4L
For F550 Super Duty 2003-2007 6.0L/2008-2010 6.4L
For F650 2004-2008 6.0L/2000-2008 5.9L
For F750 2004-2008 6.0L/2000-2008 5.9L
For LCF 2006-2009 V6-4.5L
For 2012-2013 1300 FBC L6-7.6L
For 2005-2007 3000 CHASSIS V8-6.0L
For 2006-2007 3000 IC V8-6.0L
For 2007 3200 V8-6.0L
For 2005 3300 CHASSIS V8-6.0L
For 2012 AC COMMERCIAL BUS V8-6.4L
For 2008 BE COMMERCIAL BUS V8-6.0L
For 2008-2011 BE SCHOOL BUS V8-6.4L
For 2012-2013 BE SCHOOL BUS V8-6.4L
For 2010-2013 CE COMMERCIAL L6-7.6L
For 2008 CE COMMERCIAL L6-7.6L
For 2005-2008 CE COMMERCIAL V8-6.0L
For 2010-2011 CE COMMERCIAL V8-6.4L
For 2011-2013 CE COMMERCIAL V8-6.4L
For 2005-2007 1652SC V8-6.0L
For 2009-2011 1652SC V8-6.0L
For 2008-2011 3200 L6-7.6L
For 2003-2008 3200 V8-6.0L
For 2008-2011 3200 V8-6.4L
For 2005-2007 3300 V8-6.0L
For 2006-2008 4100 V8-6.0L
For 2008-2011 4100 V8-6.4L
For 2006-2008 4100 SBA V8-6.0L
For 2003-2009 4200 V8-6.0L
For 2003-2008 4200LP V8-6.0L
For 2008-2013 4300 L6-7.6L
For 2008-2011 4300 V8-6.4L
For 2011-2012 4300 V8-6.4L
For 2008-2013 4300 LP L6-7.6L
For 2008-20114300 LP V8-6.4L
Installation instruction:
1.Place a suitable drain pan (minimum 15 quart capacity) below the drain plug.
2.Remove the drain plug with a 19 mm or 3/4" box end wrench and allow the engine oil to drain completely.
3.Remove the oil filter cap on the top of the engine using a 36 mm socket.
4.Pull the oil filter and cap straight upwards to remove it from the filter canister.
5.Remove the oil filter from the filter cap by pulling it away from the cap.
6.Remove the old oil filter cap o-ring, Lubricate the new one with clean motor oil,then install it in place.
7.Install the new oil filter. Note that the oil filter clips into the oil filter housing. You will hear it snap into place if it is installed correctly.
8.Reinstall the assembly and torque cap to 25 Nm (19 lb-ft)