9005(HB3) High Beam Specification:
LED Chip: COB LED
Wattage: 100W
Luminous Flux: 10000lm/set (20000lm/bulb)
Operating Voltage: DC 12V(fit 12V vehicles)
Color Temperature: 6000K White
IP68 rated water and dust seal, over 50000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
H7 Low Beam Specification:
LED Chip: COB LED
Wattage: 100W
Luminous Flux: 10000lm/set (20000lm/bulb)
Operating Voltage: DC 12V(fit 12V vehicles)
Color Temperature: 6000K White
IP68 rated water and dust seal, over 50000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
H7 Low Beam Specification:
LED Chip: 3570-CSP
Wattage: 100W
Lumens: 10000LM/Bulb, 20000LM Total
Voltage: DC 9-30V
Color: 6000K(White Color)
Interchange Part Number: Use for High Beam, Low Beam
Beam Angle: 360 Degrees
Placement on Vehicle: Left, Right, Front
Heat Control: Aluminum shell base including Turbo cool fan
Complete Kit: No Other Ballast/Driver Required Just Plug and Play - Newest Technology
Operating Temperature: -40°C ~ +80°C
With or without fan: with fan
Wattage: 100W
Lumens: 10000LM/Bulb, 20000LM Total
Voltage: DC 9-30V
Color: 6000K(White Color)
Interchange Part Number: Use for High Beam, Low Beam
Beam Angle: 360 Degrees
Placement on Vehicle: Left, Right, Front
Heat Control: Aluminum shell base including Turbo cool fan
Complete Kit: No Other Ballast/Driver Required Just Plug and Play - Newest Technology
Operating Temperature: -40°C ~ +80°C
With or without fan: with fan
Advantage:
*Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
• 6000K White light reflect road paint/signs better to show clearer road situation during night driving
• 270 degree low beam angle with cut-off line, will not dazzle oncoming traffic
• Built-in constant current CPU, instant full brightness without start-up relay
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections cancause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
8.Please install car headlight dust cover to ensure the normal operation of the lamp
Package Included:
2Pcs 9005 LED Headlight Bulbs High Beam
2Pcs H7 LED Headlight Bulbs Low Beam
(New and old packaging will be shipped randomly)
WARNING ABOUT POLARITY
Unlike halogen bulbs, LED are polarity sensitive.
BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
- if your light turns on, please proceed to install both bulbs onto your vehicle.
- if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.
On 22/07/2025 at 15:59:31 AEST, seller added the following information: