This Iisting is for a Remanufactured
Chrysler A604 Valve Body, years 1989-1991 with an External Round
Pin MLPS Switch, 4 Check Balls and Casting Number 4446639. This valve body has been updated and
improved over the OEM version. These updates include: an updated
converter regulator/switch valve. PLEASE BE AWARE: This listing does not include the Solenoid Pack or
the Input and Output Speed Sensors. It includes the converter regulator valve and solenoid switch valve
plugs, but does not include the solenoid pack. CAUTION: Please be careful when purchasing parts on eBay, the majority of valve bodies and parts being sold on here now are either used or made and shipped from China. There are three sellers located in Florida that sell nothing but used valve bodies claiming they are remanufactured, updated and tested. There is also a company out of Columbus, Ohio that goes by CCore on here. They are a company called Capital Core that we used to get all of our cores from. With inflation leading to increased costs you cannot remanufacture domestic valve bodies and sell them for $125-200 and you cannot remanufacture foreign models and sell them for $400. The newer 6 and 8-speed valve bodies cost even more to rebuild. You don't have to buy from us, but you do get what you pay for, so please be careful. Even though there is NO Core Charge on this valve body, a
shipping label is included to return your old valve body so we can keep
rebuilding valve bodies for customers like you. For detailed
instructions, please read the
Core Return section below. If you need help identifying the valve body you need, we can do a VIN# lookup for your vehicle to make sure you get the right part the first time. WE ARE NOT RESPONSIBLE FOR YOU ORDERING A PART THAT DOES NOT FIT YOUR VEHICLE. THE EBAY COMPATIBILITY CHART CANNOT BE TRUSTED TO BE 100% ACCURATE. Please see the Technical Information/Identification Guide below for information on how to properly identify the valve body your vehicle needs. If you have questions or need assistance please contact us and we will do our best to assist you. ALSO, WE ARE NOT RESPONSIBLE FOR THE PART NOT FIXING YOUR ISSUE. YOU CANNOT RETURN A PART ONCE IT HAS BEEN INSTALLED ONLY EXCHANGE IT. WE HIGHLY RECOMMEND YOU USE AN EXPERIENCED TRANSMISSION TECH TO INSTALL YOUR VALVE BODY. IF PROPER PROCEDURES ARE NOT FOLLLOWED, MANY TIMES IT WILL SEEM LIKE THE NEW VALVE BODY IS FAULTY, GENERATING FALSE ERROR CODES AND THE TRANSMISSION WILL REFUSE TO COME OUT OF "LIMP MODE" OR "FAILSAFE MODE." BE SURE TO CHECK INSTALL AND REPROGRAMMING PROCEDURES BEFORE INSTALLATION. As always, if you have any questions please feel free to message us here on eBay. We have an ASE certified transmission tech, with 25+ years experience rebuilding transmissions, available to answer your questions. You COULD pay LESS, or you could do it RIGHT the FIRST time and make it your LAST TIME.
The 1988-1995 A604 uses
external PN/PRNDL switches. The 1996-1998 A604 uses a single internal MLPS with
round pin terminals (small diameter case seal). In mid 1998, the MLPS
changed to a spade terminal DTR (large diameter case seal). ![]() In 2007, a pressure control solenoid
was added to the valve body and the transmission was renamed
41TES.
|
This World Wide Specialty Parts manufactured valve body is backed by our Limited Lifetime Warranty. During the first year, if the
valve body is determined to be defective, it will be replaced free of charge. After the first year, the valve body may be returned for repair or replacement, all you have to do is pay for the shipping charges to send it to us. Failure to contact us before
returning a valve body may result in a restocking fee. In addition, any
unauthorized
repairs, alterations, or disassembly WILL
VOID THE WARRANTY! Proof of purchase may be required, so please
keep a copy of your invoice just in case. Any unauthorized repairs, alterations, misuse or disassembly will void the warranty. Please
note: Installation of a World Wide Specialty Parts valve body for
diagnostic purposes will void the warranty; valve bodies subjected to
such misuse and returned under warranty will receive core credit only. This warranty does not cover: Removal and Replacement Labor Costs, Loss of time, Inconvenience or other Consequential Damage.
BEFORE READING ALL OF THIS PLEASE BE AWARE WE DO NOT CHARGE A CORE ON ALL VALVE BODIES. If we do not charge a core deposit, we just ask you use the prepaid core label to return your core if you do not want it. That way the next person who needs one will be able to get one. Thank you. When you receive your valve body there will be a plastic pouch on the top of the box. Inside this pouch is the packing slip and prepaid UPS Label for the core folded up together. Use this label and the box the new valve body comes in to ship your core back, just let the valve body drain and place it in a garbage bag before shipping please. Just stick the label on the box and drop it off at a UPS location and we will handle the rest. You have 90 days to return the core before things become complicated. After 90 days eBay and most credit card companies close the transaction and we can no longer process any refunds. We will accept cores after 90 days you will just have to contact us to arrange another way to receive the refund, through PayPal or another EFT processor. We have been short-staffed since Covid so core processing may take 4-6 weeks once your core is received. We are doing the best we can and we will get your core charge back to you, we just ask for your patience and understanding.
|