Newly upgraded headlight bulbs 9005+9006+9145
Specifications
1. Condition: 100% Brand New / Never Used
2. Voltage: DC 9-32V ( Fit 12V,24V Vehicle )
3. To Fit: Headlight+Fog Kit
4. IP Rate: IP68
5. LED type: COB LED
6. Beam Angle: 360°
7. Color Temperature: 6000K-6500K White
8. Heat Dissipation Theory: Heat Pipe Technology
9. Operating Life: >50000hrs
10. Operating Temperature: -40 - +80°C
11. Application: Headlight Light+Fog Light
12. Number of Bulbs: 6
13. Placement on Vehicle: Front
1. Condition: 100% Brand New / Never Used
2. Voltage: DC 9-32V ( Fit 12V,24V Vehicle )
3. To Fit: Headlight+Fog Kit
4. IP Rate: IP68
5. LED type: COB LED
6. Beam Angle: 360°
7. Color Temperature: 6000K-6500K White
8. Heat Dissipation Theory: Heat Pipe Technology
9. Operating Life: >50000hrs
10. Operating Temperature: -40 - +80°C
11. Application: Headlight Light+Fog Light
12. Number of Bulbs: 6
13. Placement on Vehicle: Front
Package Content:
2 x Headlight High Beam Bulbs
2 x Headlight Low Beam Bulbs
2 x Fog Light Bulbs
2 x Headlight High Beam Bulbs
2 x Headlight Low Beam Bulbs
2 x Fog Light Bulbs
New and old packaging will be shipped randomly
Fitment system may not be 100% accurate, if you are not sure which bulb size you need, please check vehicle manual or stock bulb model.
WARNING ABOUT POLARITY
Unlike halogen bulbs, LED are polarity sensitive.
BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
- if your light turns on, please proceed to install both bulbs onto your vehicle.
- if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.
Unlike halogen bulbs, LED are polarity sensitive.
BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
- if your light turns on, please proceed to install both bulbs onto your vehicle.
- if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.