This M.NT68676.2A LCD controller kit is used to turn HSD190MEN4/ M170EN06 LCD panel into Raspberry Pi and A1U gaming monitor.
Important Note:
- This kit compatilbe with original HSD190MEN4/ M170EN06 only, NOT for modified or other panel
- Video cable and Power adapter are NOT included
- Supplier may update LCD controller board or cables sometimes, so they may not same as the picture
- If you have doubts in operation, please CONTACT US
Packing List (bulk pack):
- 1 x LCD controller (M.NT68676.2A)
- 1 x Inverter (ramdom color)
- 1 x 5-keys menu panel
- 1 x LVDS cable
Compatibility:
-
17inch (1280 x 1024):
- M170EG01 M170EG02 M170EN01 M170EN04 M170EN05 M170EN06 LM170E03 LTM170EX LTM170EU LTM170EH LTM170E5 LTM170E6 LTM170E8 HSD170ME13
-
19inch (1280 x 1024):
- LM190E02 LM190E03 LM190E08 M190E5 G190EG01 M190EG02 M190EG03 M190EN01 HSD190MEN4 HSD190ME11 HSD190ME12 HSD190ME13 LTM190EX LTM190E1 LTM190E2 LTM190E3 LTM190E4
Features:
- M.NT68676.2A is a monitor control board which can support LCD panels
- Driver is pre-installed for specific models (see above Compatibility)
- Synchronize with computer automatically. Synchronization requires the synchronous signal which horizontal and vertical sync are separated
- Support dynamic contrast control, headphone input and digital volume control simultaneously
- Size of controller: 139 x 58 x 17mm
How to Use:
- Take away the old inverter and old LVDS cable from LCD panel
- Connect the new inverter and LVDS cable to your LCD panel
- Connect driver board with PC by VGA/ DVI/ HDMI cable
- Set the voltage jumper, please don\'t connect the lvds cable wrongly, wrong setting and connection will get your LCD burned
- Test GND, and red/ black wires by mulit-meter
- Input power of 12V 3A