3/4" Crankshaft Holder Tool For 3/4" Cranks with Nuts Screws Aluminum

Description

Function:
No more struggling to hold the crank when torqueing a flywheel! This tool slides over any 3/4" keyed crank and allows the flywheel to be torqued properly.

Fitment:
Simply slide this tool onto the crank, insert key and the proper size bolt through the 3/8" square hole and into the sidecover. This will lock the crank. The 3/8" square hole allows you to use a ratchet or breaker bar to hold the crank for engines without the threaded holes in the sidecover.

The hub can also be changed out for a 5/8" hub to hold 5/8" cranks or jackshafts.

Package include: 
1Set of 3/4" Crankshaft Holder Tool Kit

Note:
Made from heavy 11 gauge stainless steel with a zinc plated hub. Assembly required.
Engine and sidecover bolt are not included.



Payment

Paypal, Visa, and MasterCard are the accepted forms of payment.

Shipping

We provide professional shipping ways. Make sure the items arrive quickly.
 Your order will be dispatched within 3 working days of receiving payment (Monday-Friday) before 12am.



About Me

Your satisfaction is our long term pursuit and up-most concern. If you want to get in touch with us, it is preferable that you email us. We will try to answer most emails within 2 business days.

For any questions, please leave a message to us during our working hours: 8:30am ~ 17:00pm，Monday ~ Friday.Our apologize for late reply on Weekends & holidays.

Think carefully before leaving neutral/negative feedback.
Please feel free to contact us via e-mail first should there be any problem with the item you received.

This item does not include a paper manual. If you have any questions during installation, feel free to contact us anytime.
Function:
No more struggling to hold the crank when torqueing a flywheel! This tool slides over any 3/4" keyed crank and allows the flywheel to be torqued properly.

Fitment:
Simply slide this tool onto the crank, insert key and the proper size bolt through the 3/8" square hole and into the sidecover. This will lock the crank. The 3/8" square hole allows you to use a ratchet or breaker bar to hold the crank for engines without the threaded holes in the sidecover.

The hub can also be changed out for a 5/8" hub to hold 5/8" cranks or jackshafts.

Package include: 
1Set of 3/4" Crankshaft Holder Tool Kit

Note:
Made from heavy 11 gauge stainless steel with a zinc plated hub. Assembly required.
Engine and sidecover bolt are not included.

On Jun 11, 2025 at 09:55:31 PDT, seller added the following information:

DataCaciques