1.PREPARE THE SURFACE: This is the MOST important step! For a permanent bond, all surfaces must be perfectly clean, dry, and free of old gasket material, oil, and grease. Use a gasket scraper and brake cleaner or degreaser.
2.SHAKE WELL & APPLY: Shake the cartridge vigorously for 30 seconds. Cut nozzle tip to desired bead size. Using a caulking gun, apply a continuous, uninterrupted bead of sealant to one surface.
3.ASSEMBLE PARTS: Carefully mate the components together within 10-15 minutes of application. Finger-tighten bolts to squeeze out a small amount of sealant around the edges.
4.TORQUE & CURE: Wait about 60 minutes,for at least 24 hours to allow for a full cure.


