Equipment features
- To distribute four satellite levels and terrestrial signals to 6, 8, 12 or 16 connections
- Only a lowland is necessary for each receiver (two low guides for twin receivers)
- Independent choice horizontal/vertical, low/high from every receiver
- Switching takes place via the coaxial cable with 14/18V and 0/22 kHz signal frequency
- With integrated amplifier for low connection dampers in the satellite and terrestrial area
- Preemphase integrated for the equalization of cable damping
- Reception of the terrestrial area is also possible when the satellite receiver is switched off
- High decoupling between the outputs
- LNB remote feed option via the horizontally low entrance. All other inputs are voltage -free (thus operating with UAS 585).
- Low power consumption due to highly efficient, short-circuit-resistant switching power supply and power saving concept (each individual multi-switch branch is supplied by the connected receiver and switched off by switching off the receiver)
- For indoor installation
- Participants: 8
- Inputs: 1 x terr. | 4 x Sat-ZF
- Frequency ranges: 47-862 | 950-2150 MHz
- Connection damping ¹) 4 -> 0 | 12 -> 7 dB
- Decoupling Horiz./vert. - | 25 dB
- Decoupling participants 25 | 25 dB
- Max. Output level ²) 95 | 105 dBµV
- Control input/horiz. 12-14.5/16-19 V
- Control low/high band 0/22 kHz
- Electricity intake/participant <25 ma
- Input navigation 230 (47-63 Hz) V
- Permissible input voltage area 198-253 V
- Input nominal power at 0/150-/550-MA load: 3.4/6.3/15 W
- Voltage secondary ³) 18 V
- Max. Remove feed current total ³) 550 mA
- Protection class/protectionar: II (protected against protection)/IP 30
- Perm. Ambient temperature -20 to +55 ° C
- Connections: F-Connectors
- Dimensions (W x H x D) 215 x 148 x 43 mm
Article status
- New goods with invoice
- 2 years of warranty