12V Boat Yacht Submersible Sump Water Bilge Drainage Pump
Features:
1. The bilge pump runs freely without vibration, and will not burn out the pump if it runs without water for a short time, and suction lift does not need to be fully submerged, thus providing you with a convenient using experience.
2. The bilge pump is great for you to drain water efficiently, which has a good motor and help drain the water efficiently; It is good for hydraulic systems fed with cold water and can be applied in line to be fed by gravity or pressure.
3. The bilge pump hose is composed of quality PVC material, and the bilge pump is made of stainless steel shaft, and the body of pump is made of tough, moisture resistant ABS plastic, have a good oil, solvent and sunlight resistance, serviceable for long time use.
4. The hose of 12v bilge pump has a corrugated spiral design with anti kink structure and small bending radius, which can ensure a long service life as well as keep a stable flow rate, the cuff-less design with a smooth inner hole prevents leakage at the connection end.
Specification:
Condition: 100% Brand New
Material: ABS + Stainless Steel
Color: Red, White, Blue
Fitment Type: Performance/Custom
Voltage: 12V DC
AMP Draw: 3 Amp
Flow Rate: 1100GPH
Outlet Pipe Diameter: 29mm
Maximum Temperature: 110°F (43°C) Max.
Fitment:
Suitable for 1-1/8" O.D pump outlet.
Ideal for fishing boats, cruise ship, yachts, ponds, pools, spas, motorhomes, agricultural irrigation, long-distance pumping in the yard, solar water system, aquariums, fountain and other applications where you have to remove water from.
Not to be used with AC voltage applications.
Not for use with below waterline thru-hull connections.
Please check your bilge pump outlet size, our photos and the description before purchase.
Packing Included:
1 x Submersible Water Pump
Installation Method:
Connect black/blue wire to negative and red wire to positive.
Notes:
1. All dimensions are measured by hand, there may be small deviations.
2. No installation instruction included, professional installation is highly recommended.
3. These pumps are designed for intermittent use only, not designed for continuous use.
4. Do not put the wire connection in the water, otherwise the water pump will not work properly.
5. This pump is designed for fresh water and salt water. Polarity is important. If it is not correct, the pump rotates backwards.
6. When the water pump cannot start or stop automatically, please clean the three sensing electrodes with a hard brush first.
7. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
