eBay

Force Gauge Test Stand Bracket Hand Dynamometer Stand For AMF Series Force Gauge

This product does not include a force gauge, only the bracket

Ⅰ Function：

The Screw test stand are fit to the domestic and imported AMF series point type of mechanical force gauge and

destructive force test. Users can clearly observe the displacement when testing.

Ⅱ Features：

1.The machine stand base is large and stable, which is suitable for indoor testing on the desktop.

2.It is driven by the screw, and its gauge head displacement is accurate, with the side hand wheel loading, and the simple

and stable operation.

3.The mobile platform of the base owning the standard layout can realize left, right, forward and backward movement, with

convenient and accurate clamping.

4.The machine stand can be installed in the table (desk) to use, having more solid machine frame.

Ⅲ Specifications and Parameters：

Length × width × height: 140×210×448(mm)

Effective stroke:296mm

Maximum load:500N

Net weight:3.9kg

Ⅳ Installation Methods of the Machine Stand and Push & Pull Meter

A.Installation Method of the Machine Stand：

The machine stand can be installed on the table, which makes it more stable. Under installation, please ensure the work

table surface to be level, in order to obtain accurate numerical value from tests. The installation refers to the (following

figure)

B.Installation Method of the Push & Pull Meter：

1.Install the standard M4 × Remove the 8 socket head screws。

2.Align the four threaded holes on the mounting plate with the measuring head of the digital display meter facing

downwards.

3.Tighten the screws with an Allen wrench.

4. According to the characteristics of the sample tested, place the machine stand in a proper position on the worktable.

Rotate the hand wheel on the side of the testing frame, the dynamometer will be able to move smoothly up and down,

completing the testing operation.

Ⅴ Routine Maintenance

1.Do not overload the machine and the rated load of this machine frame is 500N.

2.Pay attention to the routine maintenance work, keeping the machine stand components clean.

3.In the process of the machine stand operation, if the operation is unsmooth or inflexible, please add a little machine oil

into the re-oiling hole of the bearing seat on the two sides of the machine stand to lubricate it. When any breakdown of the

machine stand occurs, please contact the manufacturer or the dealer (Do not disassemble or repair in an unauthorized way).

Ⅵ Diagram of Structure

VII Packing list