UTV vehicle safety switch turn signal kit with hardware - 4 amber 2 red round LEDs and License Plate LED

 

Round Amber LEDs : 4 Amber, 2 Red Great for your UTV or Golf cart project

 

Looking for a simple turn signal kit at a great price? We've got what you're after.

 

Great for your UTV, golf cart, dune buggy or 4x4 project.

 

Easy to install for anyone with a basic understanding of 12v electrical systems.

 

Just 2 wires to connect from vehicle (only requires 12v+ source and chassis ground)

 

These 3/4" LED lights are about as simple as it gets when mounting lights. Simply drill a 3/4" hole and push these little guys in. BAM!  It's that easy! These little lights fit absolutely PERFECT on all 4 corners of a Polaris RZR and take less than a minute to mount all 6 of them.

 

Uses factory brake lights and converts them for use as brake AND turn signal just like many automobiles. Front indicators (3 per side) mount into a 3/4" diameter hole to provide a clean oem appearance .

 

4- amber color Led lights for front corners of vehicle   (3/4" mounting hole or or easily fit into grille without drilling any holes )

2- red LED lights great for interior turn signal indicators (or use as overhead maplights  or mount dash indicators )

This is a DIY universal kit and ships with 6 lights. Depending on your installation, you may need additional lights (available separately) to ensure adequate visibility.

( For even more style and visibility add additional lights to each corner. Lights available in our other listings)

 

Rocker switch harnesses are prewired into the main control module and simply plug onto the back of the rocker switch. No fubling with qd's or splicing wires.

Utilizing Genuine Carling OEM matching rocker switches (snaps directly into Polaris Ranger OEM switch holes)

Blue illuminated Left / Right rocker lights up with key on and also flashes when selected thus indicating direction.

 

Extended length harness fits 2 and 4 seat models

 

This kit was created out of a need. Late model Polaris Rangers utilize a totally different rocker switch than the majority of aftermarket rockers available. If you have a late model Polaris Ranger (2018 and up specifically) and have punched the OEM rocker switch holes out or have a unit that someone else punched the holes out already......well, you aren't going to fit standard aftermarket switches into that hole as the switch will simply flop around or disappear into your dash when you attempt to snap it into place. Solution! This kit utilizes matching OEM size rocker switches. As such, these switches easily snap into any of your OEM rocker switch knockouts located in the center dash or to the left of the steering wheel.

 

UTV Turn Signal Kit Universal Turn Signal with Rocker Switch Amber LED Blinker Kit

1. Legal On The Road: What accessories do you need to make your vehicle road legal? Among the essential accessories are turn signals, which help you get one step closer to being street legal. Warm Tips: State and local laws may differ from those for street legal UTVs. Please check your local laws before driving on the road

2. Upgraded Wire Harness Length: The 215-inch turn signal kit is perfect for both 2-seater and 4-seater vehicles. This turn signal kit for side by side UTVs can accommodate vehicles up to 150 inches in length. Color lines are marked on the corresponding installation locations to improve your installation efficiency

3. Amber Led Light: Why choose an amber turn signal kit? Amber stands for warning and caution. Amber light is the most penetrating light in the spectrum and can be seen from a long distance in rainy and foggy weather. Amber light can make it easier for vehicles behind to notice your vehicle and create vigilance, thus improving safety awareness

INSTALLATION GUIDES

Please confirm the location which you want to install the lights before, we record you install the amber/red lights in rear/front of the UTV if you vehicle dont have the turn signal kit

Note: Test the function of the product before installing the product. (Recommended 10A current or above)  

1. Install the black control box at suitable place(Using your own 3M backing to stick or self-tapping screws to install ). 

2. Connect the positive and negative poles of the wire with battery correctly. 

3. Drill six suitable holes in the front and rear of the vehicle,then install the light bulb. (Recommended 4Pcs amber lights in front of the UTV and 2Pcs red lights in rear of the UTV ) 

4. Install the turn light & rocker switch.