Feature:

Connector: 4 Pins
Connector Gender: Female
Terminal Gender: Male
Terminal Type: Blade
Voltage: 12V

Thread Diameter：M14×1.25-25.0

Specifications

• Brand New Ignition Coil           

• Built to strict quality control standards.     

• Ready to use, Direct Replacement.

• 100% Compatible with OEM Parts, meets Original Equipment Manufacturer (OEM) Standards

• 100% pure copper windings in bobbins improve durability ,thermoplastic housing withstands heat stress for enhanced durability

• Silicone rubber boot withstands extreme heat to ensure superior insulation

• Spark Plugs are using High-Performance Iridium metal, Much better than Nickel and Platinum

• It's suggested that ignition coil and spark plug be replaced in a sychronized manner to lower the likelihood of common ignition system dysfunctions such as failure to start, engine vibration, misfiring, inadequate power, spark plug fouling and poor fuel economy

Warranty: 1 Year

Package including: 6pcs Ignition Coil + 6pcs Iridium Spark Plug

If you have any questions, please contact us first and we will solve it for you. Thank you for your kindness！

NOTE:

• Installation Manual Is NOT Included.
• Professional Installation Is Highly Recommended.
• Please check the part number on your old part housing before purchase.
• please confirm the item if it matches your car before you purchase.
• We only sell BRAND NEW parts, unless otherwise stated.

Ignition Coil: C1555 5c1612 Ic019 UF569 52-1853, D500C, D597A, 5C1612, E1069, 52-1853, IC649, 12590990, 12610626, 12618542, 12632479, UF-569, 33400-78J02

Iridium Spark Plug: 41-109

Fit for:

2010 Buick Allure 3.0L V6 

2010 Buick Allure 3.6L V6 

2008-2019 Buick Enclave 3.6L V6 

2010 Buick LaCrosse 3.0L V6 

2010-2016 Buick LaCrosse 3.6L V6 

2013-2015 Cadillac ATS 3.6L V6 

2010-2013 Cadillac CTS 3.0L V6 

2010-2015 Cadillac CTS 3.6L V6 

2010-2011 Cadillac SRX 3.0L V6 

2012-2016 Cadillac SRX 3.6L V6 

2010-2011 Cadillac STS 3.6L V6 

2013-2019 Cadillac XTS 3.6L V6 

2010-2015 Chevrolet Camaro 3.6L V6 

2012-2017 Chevrolet Caprice 3.6L V6 

2012 Chevrolet Captiva Sport 3.0L V6 

2015-2016 Chevrolet Colorado 3.6L V6 

2011-2012 Chevrolet Equinox 3.0L V6 

2013-2017 Chevrolet Equinox 3.6L V6 

2012-2019 Chevrolet Impala 3.6L V6 

2014-2016 Chevrolet Impala Limited 3.6L V6 

2010-2012 Chevrolet Malibu 3.6L 

2010-2019 Chevrolet Traverse 3.6L V6 

2007-2016 GMC Acadia 3.6L V6 

2017 GMC Acadia Limited 3.6L V6 

2015-2016 GMC Canyon 3.6L V6 

2010-2012 GMC Terrain 3.0L V6 

2013-2017 GMC Terrain 3.6L V6 

2011 Saab 9-4X 3.0L V6 

2007-2010 Saturn Outlook 3.6L V6 

2010 Saturn Vue 3.6L V6 

2009-2010 Suzuki Grand Vitara 3.2L V6

How to Change Ignition Coils and Spark Plugs?

This product recommends professional installation.

1. Disconnect the old ignition coil and spark plugs

2. Disconnect your battery’s negative terminal

3. Locate the ignition coil and spark plugs to be replaced.

4. Release the clip on the plug running into the side of coil.

5. Use a wrench to unscrew the bolts holding the original coil in place

6. Extract original ignition coil and spark plugs from the engine bay

7. Swapping in the new ignition coil and spark plugs

8. Prior to installation, compare the new coil to the old one

9. Orient the new coil in the same direction

10. Insert the bolts to hold the coil in place

11. Activate the New ignition coil and spark plugs

12. Connect the plug into the side coil

13. Plug in ignition cables according to the order written on them.

14. Reconnect the battery

15. Start the vehicle to test the new ignition coil and spark plugs

Note:

1. In preparation for the replacement, the vehicle should be turned off and cooled for a certain period of time before starting the replacement.

2. Pay attention to the cleanliness of the entire operation, must wipe the ignition coil around the dust and oil, if into the combustion chamber, will have serious adverse effects, try to wear gloves to operate.