Air Flow: 35L/min

 
Description:

    Its modern small design was created for the everyday use and can be stored in any small compartment or storage area. With its metal exterior casing it’s durable to meet any indoor and outdoor use. Just plug it into any 12V DC outlet and pump away. Its long power cord gives you the ability to inflate various products no matter where they are located. A fantastic gift for the sports and recreational enthusiasts and any automotive needs. Order your pump now! Press the buy it now.


Features:

Specifications:
 
Package including :
 
Air Flow: 40L/min 
 
Features:

1.Higher flow design, normally, car tire can be inflated in 3-10 minutes.

Inflates car/pickup tires, sports balls, air beds, dinghies, etc.

2.Easy-to-read pressure gauge.

3.Light Weight,Compact and portable, great for camping trips and roadside emergencies.

4.Easy to use, store and transport.

5.3 Meters Cord Plug into 12 volts Cigarette Lighter Plug.

6.The maximum working pressure of this air pump is 150psi,

7.This air pump is suitable for inflating car tires, bicycle tires and balls. Therefore, the inflated products are different, and the pressure value is also different. The original pressure of the car tire is different from the load bearing capacity. It is usually normal to reach a pressure value of 50 psi -80 psi.

Specification:
  1. Use 12 Volt DC 15A Only

  2. Color: Silver

  3. Size: 24x12x9.5cm (L x W x H)

  4. Material: Carbon Steel+Plastic+Electronic Component

  5. Air Flow: 40L/min

  6. Power: DC 12V

  7. Power Cord Length:300cm

  8. Current: 15A(Max)

  9. Maximum Output 150 PSI.

  10. Working Temperature: -55°C to 60°C

  11. Note:Some car cigarette lighters have insufficient voltage and power to turn on the air pump. At this time, you need to connect the car battery to turn on the air pump switch use the battery clip.

【Precautions】

1. Please start the car engine to increase the power first, avoid to consume the car battery power.

2. This machine is limited to DC (DC12V15A) power supply. Do not use domestic high voltage power supply.

3. When inflating, please take a rest for cooling and rest after a 10 minute continuous operation , which can extend the life of the motor. But for rubber boat inflating, it can work continuously for 30 minutes.

4. When inflate general tire, it can reach the normal tire pressure of 220KPA in about 3-6 minutes. Big tires will take a little longer. When inflated, if the meter pointer rises rapidly, indicating that the air is not charged into the tire. It must be stopped and re-operated. Otherwise, the instrument and motor will be damaged.

Package includes: