Note:
1. This kit is for vehicles with Factory Halogen Systems, it will not work with vehicles with Factory HID.Pls confirm the item if it can matches your car before you purchase.
2.This lisiting do not included bulb holders, some of the car need add bulb holder to get the LED bulbs replace the halogen bulbs
3. If there is an error on the onboard computer after installed LED light bulb on a car, please install a resistor or capacitor to eliminate the error message. This product does not come with an external resistor or capacitor.
1. This kit is for vehicles with Factory Halogen Systems, it will not work with vehicles with Factory HID.Pls confirm the item if it can matches your car before you purchase.
2.This lisiting do not included bulb holders, some of the car need add bulb holder to get the LED bulbs replace the halogen bulbs
3. If there is an error on the onboard computer after installed LED light bulb on a car, please install a resistor or capacitor to eliminate the error message. This product does not come with an external resistor or capacitor.
This listing compatible with 3 pairs (H7+H11+H11) 6000K white super bright headlight high/low beam + fog light bulbs conversion kit.
Headlight Specification:
Plug Type: H7 (High Beam) + H11(Low Beam)
Chip Type: High Power 4 Sides COB Chip
Luminous Flux: 15000LM/set (7500LM/bulb)
Operating Voltage: DC 9-32V
Wattage: 75W per bulb
Color Temperature: 6000K WhiteIP67 rated water and dust seal, over 50000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -40 ~ +80 degree Celsius
Usage: Headlight
Foglight Specification:
Plug Type: H11/H8/H9 (fog light)
Luminous Flux: 10000LM/set (5000LM/bulb)
Operating Voltage: DC 12-24V
Wattage: 50W per bulb
Color Temperature: 6000K White
IP67 rated water and dust seal, over 50000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: Fog light
Color Temperature: 6000K White
IP67 rated water and dust seal, over 50000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: Fog light
Package Included:
2pcs 6000K White H7 Headlight High Beam Bulbs
2pcs 6000K White H11 Headlight Low Beam Bulbs
2pcs 6000K White H11/H8/H9 Fog Light Bulbs
2pcs 6000K White H7 Headlight High Beam Bulbs
2pcs 6000K White H11 Headlight Low Beam Bulbs
2pcs 6000K White H11/H8/H9 Fog Light Bulbs
The box is sent randomly
Advantage:
*Latest COB chip(USA) light source, 4 luminous faces no blind zone
*Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
*6000K White CHUSYYRAY light reflect road paint/signs better to show clearer road situation during night driving
*270 degree low beam angle with cut-off line, will not dazzle oncoming traffic
*Built-in constant current CPU, instant full brightness without start-up relay
*Latest COB chip(USA) light source, 4 luminous faces no blind zone
*Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
*6000K White CHUSYYRAY light reflect road paint/signs better to show clearer road situation during night driving
*270 degree low beam angle with cut-off line, will not dazzle oncoming traffic
*Built-in constant current CPU, instant full brightness without start-up relay
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
8.Please install car headlight dust cover to ensure the normal operation of the lamp.
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
8.Please install car headlight dust cover to ensure the normal operation of the lamp.
NOTE:
Please contact us first before you leave a negative feedback, we will try our best to solve problem for you. Thanks.
Please contact us first before you leave a negative feedback, we will try our best to solve problem for you. Thanks.