This 30 Inch Offroad Rear Chase LED Light Bar is Multi-Functional with right/left turn signal, brake light, white light , and has 7 Different Patterns for UTV, ATV, and Side by Sides. Brighter and more Effective than Standard LED Strobe Lights ,LED Strobe Chase Bar for Off-Road UTV ATV SXS has a Total of 5 Blocks and 6 High Power LEDs Per Block. Flood Lens Increase Visibility & Safety. You are Sure to be Seen in Fog, Rain, Snow, or any other weather condition. Can Endure Harsh Road Conditions and Extreme Weather.
Technical Specification:
1. Chase LED light bar with amber strobe lights
2. 5 LED blocks including brake/running light - 2 x strobe amber - steady white
3. Brake/Running Light: this brake / running lights are wired independently, 2 blocks of 4 LEDs each
4. Strobe Amber Light: 2 blocks of 4 LED amber strobe lights with independent wiring and flashing patterns that can be controlled by the on/off switch
5. Steady White Light: 1 block of 4 white LED light
6. High intensity LED chip 50,000+ Hours life expectancy
7. it's a must for All enthusiasts looking for extra safety.
Specification:
Type:30Inch LED Strobe Light bar
Light Length:30 inch
Color:Red White Amber
Input Voltage: DC 9-30V
LED QTY: 30/pcs
Luminous Flux: 30000LM
Beam: 121° Flood Beam
Waterproof Rating: IP68
Lifespan: up to 50000 hours
Material: Die-cast Aluminum Housing, Toughed Glass Cover, aluminum substrate circuit board ,led chips,
Appearance: Black, Square Shape
Working Temperature: -60 to 85℃
Dimension:30.82*1.8*1.6inch (Approx)
Weight:1.8KG / 3.8LB
Apply to car: front, rear, Rear Facing, Front Facing, Center
Vehicle Service Type : Traffic crews, Construction workers
Special Feature: Memory
Color: Red & Amber & White
Certification:CE, RoHs, FCC
Product Feature: Street-sport-motorcycles , Easy to install and use, Includes all necessary hardware needed, Durable and long lasting,
Feature:
1. Strobe Lights have 8 Different Patterns
2. Independently Control Brake Light, Reverse Light, and Strobe Patterns, turn strobe off by holding
3. the strobe pattern switch for 3 seconds
4. Brighter and more effective than standard LED strobe lights
5. Die-cast aluminum housing for maximum heat dissipation
6. IP68 Water resistant
7. Hard coated flood optic polycarbonate lens
8. Independently control turn signal light, brake / running light, reverse light and 8 strobe patterns
9. Two types of wire harnesses with Power on/off switch (strobe controller) and Rocker Switch are included
10. Angle adjustable side ends mount brackets included
11,Whether you're a volunteer fireman on a budget or a cash-strapped police department, you will not find a more economical and brighter visibility lighting solution. Perfect for EMTs, construction workers, and traffic crews.
12. Better Visibility in Harsh Weather conditions,Can be used when driving through fog, snow or rain,see in day and night
Two types of wire harnesses:
Push switch upward to power off
Back to middle to power on
Downward for strobe function
Strobe Function:
1. Press the switch to turn on/off. Function momentary.
2. Press down the switch for 3 seconds to turn on/off the strobe lights.
3. Amber strobe patterns include 1 solid, 8 flash strobe lights.
4. These two types of wire harnesses are included in the box. Users can choose either one or the other.
Note:
1.To power this chase light bar, connect the Red Wire 12V (+) to the Positive post of the vehicle's battery. Connect the Black Wire (-) to the Negative post of the battery.
2. The Red Running Light will always be on when the chase light bar is power-on.
3. Brake & Turn Signal functions may require relays to work properly (Relay is not included due to Universal Fitment).
4. 4 Door Models may require the 3 Pin Extension Cable.
5. Professional installation recommended.
Package Include:
1x 30"Inch Chasing Light Bar
1x Wire harness with rocker swithc
1x wire harness with in-line dual switch
1x 3Pin extension cable
1x multifunction wire
1x Mounting Brackets&screws
1x Instruction