SeeSii Upgraded NanoVNA-H4 Vector Network Analyzer, Latest V4.3 10KHz-1.5GHz HF VHF UHF 4" Touch Screen VNA Antenna Analyzer Measures S Parameters,Voltage Standing Wave Ratio, Phase,Delay, Smith Chart

  • UPGRADED NANOVNA ANALYZER: SeeSii Nanovna-h4 Vector Network Analyzer is developed by Hugen. With latest 4.3 version,10KHz-1.5GHz measure range,4.0 inch LCD touchscreen,mini and portable design.This Antenna Analyzer is provides outstanding vector network measurement capabilities and perfect for evaluating antenna resonance and SWR.It is a very handy & smart analyzer for electronics engineer, amateur radio operators or radio diy amateurs
  • BUILT-IN MICRO-SD PORT & TIME DISPLAY: The lastest antenna analyzer with MicroSD card port,so you can save field test data or screens to a MicroSD card at any time,support up to 32GB memory card. (Not include in the pacakge).In addition, different from old version NanoVNAs, the date and time can be customized, which is convenient for you to further record and save data..The default firmware main function is used for antenna performance measurement
  • IMPROVED FREQUENCY ALGORITHM:The Vector Network Analyzer can use the old harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics.Great for trouble shooting antennas and improving performance
  • PC CONNECTION & TX/RX FUNCTION:The vna analyzer uses PC software NanoVNASaver, it can connect to a NanoVNA and extracts the data for display on a computer for saving to Touchstone files. We can export Touchstone (snp) files for various radio design and simulation software through PC software.In addition,the default firmware is mainly used for antenna performance measurement. The TX/RX method can measure the complete S11/S21 parameters (need to manually replace the transceiver port wiring)
  • Abundant Accessories:Equipped with 1x NanoVNA-H4(with 1950mA-h battery), 1x USB Type-C cable, 2 x 15cm SMA male to male RG316 RF cable, 1x SMA male calibration kit - OPEN,1x SMA male calibration kit - SHORT ,1 x SMA male calibration kit - LOAD,1 x Touchscreen pen.It's very useful as an antenna analyzer for your ham station, easy to set without fancy calibration
  • Reliable After-Sales Service:We provide professional technical support to keep you away from after-sales worries. If you are not satisfied with SeeSii Nanovna Vector Analyzer or have any other questions, please feel free to contact us. Our after-sales service experts will reply to your information as soon as possible, We will do our best to solve your problems, and you can purchase and experience with confidence
1

Upgraded Nanovna-H4 with 4.3 Version,10KHz-1.5GHz Vector Network Analyzer for Measuring S Parameters HF VHF UHF SWR, Phase, Delay, Smith Chart

SeeSii Nanovna-h4 Vector Network Analyzer is developed by Hugen. With latest 4.3 version,10KHz-1.5GHz measure range,4.0 inch LCD touchscreen, mini and portable design. It is a very handy & smart analyzer for electronics engineer, amateur radio operators, beginner or radio diy beginner.

Equipped with 1x NanoVNA-H4(with 1950mA-h battery), 1x USB Type-C cable, 2 x 15cm SMA male to male RG316 RF cable, 1x SMA male calibration kit - OPEN,1x SMA male calibration kit - SHORT ,1 x SMA male calibration kit - LOAD,1 x Touchscreen pen.It's very useful as an antenna analyzer for your ham station, easy to set without fancy calibration.The firmware of the nanovna-h4 can be updated by the user. New versions of the firmware needed pls tell us for download link.

6

Saving Measurement Data with a MicroSD Card—Support up to 32GB Memory Card

You can use a MicroSD card to save measurement data in SNP format or to save screenshots in BMP format. MicroSD card uses SPI mode and only supports smaller than 32GB and formatted with FAT or FAT32.

In addition, different from old version, the date and time of vna can be display, which is convenient for you to further record and save data.

2

3

int

4.0 inch Touch Screen

Equiped with a 4.0 inch touch screen, you can operate the device by the screen or the multi-functional switch one the top.

1950 mA-h Large Battery

4.0 inch screen also brings larger battery, NanoVNA-H4 comes with a 1950mA-h rechargeable battery, continuous working time up to 8 hours

Improved Accuracy

The metal shield is designed to reduce the external interference and improve the measurement accuracy.Use strong and secure power supply at the same time.Enhanced performance in all aspects

43

bc

mu

New Updated 4.3 Version

NanoVNA-H4 is now updated to 4.3 version, it covers frequency up to 1.5Ghz, and the battery information will also be displayed on the screen.

PC & Android Cellphone Control

Customized PC & cellphone app make it easier to operate the device.

We can export Touchstone (snp) files for various radio design and simulation software through PC software

Compact Portable & Powerful

This Antenna Analyzer is a DIY product that provides perfect vector network measurement capabilities, tiny and handheld.The default firmware main function is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters (you need to manually replace the transceiver port wiring)

Specifications

Measurement frequency10KHz -1.5GHz
RF output0dbm (±2dbm)
Measurement range70dB (50kHz-300MHz),60dB (300M-900MHz), 40dB(0.9G-1.5GHz)
Port SWR< 1.1
Display4 inch TFT (320 x 480)
USB interfaceType-C
Communication modeCDC (serial)
Rechargeable batteryBuilt-in 1950mA-h battery
Number of scanning points101 (fixed)
Version informationLatest 4.3 Version
After-service Time1 Year
Firmware UpdateSupported
10

Datacaciques