Note!!!:
Fitment system may not be 100% accurate, if you are not sure which bulb size you need, please check vehicle manual or stock bulb model.
Information:
If you are unsure the item fit or not , please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not.
For example:
For 2004 Ford F150, high/low beam
For 2015 RAM 1500 with projector-type, high beam
For 2019 Ford F150 ,XL Crew Cab Pickup 4-Door 2.7L
Technical Specification:
● Bulb Socket: H9 High Beam + H11 Low Beam
● Chip Type: 2pcs* CSP Bridgelux chips, 360 degree clear beam no blind zone
● Technology: Bulit-in driver & cooling fan
● Connector(s): plug and play
● Operating Voltage: DC 9V ~ 32V , Fit for 12V & 24V vehicle.
● Wattage: 80W per bulb
● Luminous Flux: 16000 LM per set
● Color temperature: 6000K
● Light color: Cool White
● Material: Aviation 6063 aluminum profile
● Beam Angle: 360 degree
● Operating Temperature: -40-80 degree Celsius
● Waterproof Rate: IP67 rated Waterproof and dust seal, works well even in extreme weather
● Lifespan: over 50000 hours life time, stable quality and long service life
● Application: headlight high beam or low beam
● Built-in constant current CPU,instant full brightness without start-up relay
● Easy plug and play design, no resistor or modification needed.
Two-way Heat Dissipation Channel:
1. All-in-one aluminum profile as heat conduction system, 360 degree heat radiating.
2. Built-In Turbo Cool Fan, High speed 12000 r/min, high air flow for faster cooling rate.
Package Include:
2pcs H9 Replace Factory Halogen High Beam
2pcs H11 Replace Factory Halogen Low Beam
New and old packaging will be shipped randomly
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
8.Please install car headlight dust cover to ensure the normal operation of the lamp
Contact Us:
Please contact us first before you leave a negative feedback, we will try our best to solve problem for you. Thanks.