Specification:

1. Basic parameters
Model: 6015
Size: 60mm (length) x 60mm (width) x 15mm (height)
Voltage range: Supports 5V, 12V, 24V (wide voltage design, suitable for various power environments)
Current: usually between 0.1A and 0.5A (depending on voltage and speed)
Speed: Approximately 1500 RPM -4000 RPM (depending on voltage)
Airflow: Approximately 15-40 CFM (cubic feet per minute)
Noise: typically 20-35 dB (decibels), low-noise design
Bearing type: Dual Ball Bearing, with long service life and high reliability
Motor type: Brushless Motor, high efficiency, long lifespan
Interface type: usually 2-pin or 3-pin interface (3-pin interface supports speed measurement function)
Material: Plastic shell, lightweight design

2. Characteristics
Double ball bearing: Adopting a double ball bearing design, it has a long service life and is suitable for long-term high load operation.
Brushless motor: Brushless design, high efficiency, long lifespan, and more stable operation.
Wide voltage support: Supports 5V, 12V, 24V, suitable for various power environments.
Efficient heat dissipation: Provides stable air flow, suitable for the heat dissipation needs of small and medium-sized devices.
Low noise operation: Optimized design, with low noise during operation, suitable for noise sensitive environments.
Easy to install: Standard 60mm size, easy to install, strong compatibility.

3. Application scenarios
Computer case cooling: used for cooling desktop computer cases to ensure stable hardware operation.
Electronic device heat dissipation: such as routers, industrial control devices, NAS, etc.
DIY project: Suitable for creative projects that require small and medium-sized cooling fans.
Other: Any occasion that requires efficient heat dissipation.

4. Precautions for installation and use
Voltage matching: Select the appropriate voltage (5V, 12V, or 24V) according to the equipment requirements to avoid overvoltage or undervoltage operation.
Airflow direction: Pay attention to the airflow direction of the fan (usually indicated by arrows) to ensure correct installation.
Cleaning and maintenance: Regularly clean the fan blades and air inlet to avoid dust accumulation that affects performance.
Avoid blockage: Ensure that the fan inlet and outlet are unobstructed to avoid affecting the heat dissipation effect.
Installation and fixation: Use screws or rubber pads to secure the fan and avoid vibration during operation.

5. Selection suggestions
If long-term operation is required, dual ball bearings and brushless design are ideal choices.
If you are sensitive to noise, you can choose low-speed models.
Select the appropriate air volume and speed according to the specific requirements of the equipment.
Pay attention to the interface type of the fan to ensure compatibility with the device.
The 6015 dual ball bearing brushless cooling fan, with its efficient cooling performance, wide voltage support, and low-noise operation, is very suitable for scenarios such as computer cases and electronic devices. It is a practical and reliable cooling solution.