Item Information                                                                                       

This listing is for a Remanufactured Saab/GM 4L60E Valve Body, model years 2003-2008.(Valve Body Gasket Set Included)

This valve body is better than OEM, it features many upgrades to increase reliability over the standard OEM valve body.

These upgrades include: upgraded Actuator Feed Limit Valve, TCC and accumulator valves, all solenoids are tested and rebuilt or replaced with new.

CAUTION: Please be careful when purchasing parts on eBay, the majority of valve   bodies and parts being sold on here now are either used or made and   shipped from China. There are three sellers located in Florida that  sell nothing but used valve bodies claiming they are remanufactured,  updated and tested. There is also a company out of Columbus, Ohio that goes by CCore on here. They are a company called Capital Core that we used to get all of our cores from. With inflation leading to increased costs you cannot  remanufacture domestic valve bodies and sell them for $125-200 and you  cannot remanufacture foreign models and sell them for $400. The newer 6  and 8-speed valve bodies cost even more to rebuild. You don't have to buy from us, but you do get what you pay for, so please be careful.

Even though there is no core charge a shipping label is included to return your old valve body so we can keep rebuilding valve bodies for customers like you.

For detailed instructions, please read the Core Charge section below.

ALL Solenoids are retested before the valve body is shipped to you. Quality and reliability are our passion.

ALL of our valve bodies come with a TRUE LIFETIME WARRANTY, this is the last valve body you will EVER need to buy! Most sellers only offer 12 months/12,000 miles, but we stand behind our rebuilds for LIFE.

ALL of our Quality Remanufactured Valve Bodies are made here in the United States. This is not a cheap Chinese Rebuilt Valve Body like you will find at some auto parts stores. When you purchase from us, you are helping to create and maintain American jobs. Thank you.

Below you will find some useful information on identifying your valve body and repair/replacement guidance.

If you need help identifying the valve body you need, we can do a VIN# lookup for your vehicle to make sure you get the right part the first time. WE ARE NOT RESPONSIBLE FOR YOU ORDERING A PART THAT DOES NOT  FIT YOUR VEHICLE. THE EBAY COMPATIBILITY CHART CANNOT BE TRUSTED TO BE 100%  ACCURATE. Please see the Technical Information/Identification Guide below for information on how to properly identify the valve body your vehicle needs. If you have questions or need assistance please contact us and we will do our best to assist you. 

ALSO, WE ARE NOT RESPONSIBLE FOR  THE PART NOT FIXING YOUR ISSUE. YOU CANNOT RETURN A  PART ONCE IT HAS BEEN  INSTALLED ONLY EXCHANGE IT. WE HIGHLY RECOMMEND YOU USE AN
EXPERIENCED TRANSMISSION TECH TO INSTALL YOUR VALVE BODY. IF PROPER PROCEDURES ARE
NOT FOLLLOWED, MANY TIMES IT WILL SEEM LIKE THE NEW VALVE BODY IS FAULTY, GENERATING
FALSE ERROR CODES AND THE TRANSMISSION WILL REFUSE TO COME OUT OF "LIMP MODE" OR
"FAILSAFE MODE." BE SURE TO CHECK INSTALL AND REPROGRAMMING PROCEDURES BEFORE
INSTALLATION. As always, if you have any questions please feel free to message us here on eBay. We have an ASE certified transmission tech, with 25+ years experience rebuilding transmissions, available to answer your questions.

You COULD pay LESS, or you could do it RIGHT the FIRST time and make it your LAST TIME

Technical Information                                                   

 
The 4L60E Valve Body for model years 2003-2008 has a Bosch Style
EPC. Please see RED ARROW above for its location.



The 03-Up 4L60E uses a silver body Holley EPC solenoid with a molded connector (2). The valve body also has a full annular TCC with a bridge in the center of the square passage (3).

Troubleshooting Guide                                                                          

Problem: Some or all Solenoid Codes set when the vehicle is started.

Possible Cause #1: Check battery voltage during cranking. If the battery voltage drops below 10.5 volts, the battery needs charging, the cables need to be cleaned, or the battery needs to be replaced.

Possible Cause #2: The ignition switch may be faulty. Install a fused jumper wire between the positive battery cable and the "Trans" fuse in the fuse box on trucks. This will keep battery power to the solenoids during cranking if the ignition switch is bad. Start the engine and check for codes. If no codes are present with the jumper wire in place, then the ignition switch is bad.

Warranty Information                                                                                  

This World Wide Specialty Parts manufactured valve body is backed by our Limited Lifetime Warranty. During the first year, if the valve body is determined to be defective, it will be replaced free of charge.

After the first year, the valve body may be returned for repair or replacement, all you have to do is pay for the shipping charges to send it to us. 

Failure to contact us before returning a valve body may result in a restocking fee. In addition, any unauthorized repairs, alterations, or disassembly WILL VOID THE WARRANTY! Proof of purchase may be required, so please keep a copy of your invoice just in case. Any unauthorized repairs, alterations, misuse or disassembly will void the warranty. 

Please note: Installation of a World Wide Specialty Parts valve body for diagnostic purposes will void the warranty; valve bodies subjected to such misuse and returned under warranty will receive core credit only. 

This warranty does not cover: Removal and Replacement Labor Costs, Loss of time, Inconvenience or other Consequential Damage.

Core Charge Instructions                                                                                                    

BEFORE READING ALL OF THIS PLEASE BE AWARE WE DO NOT CHARGE A CORE ON ALL VALVE BODIES.
If we do not charge a core deposit, we just ask you use the prepaid core label to return your core if you do not want it. That way the next person who needs one will be able to get one. Thank you.

When you receive your valve body there will be a plastic pouch on the top of the box. Inside this pouch is the packing slip and prepaid UPS Label for the core folded up together. Use this label and the box the new valve body comes in to ship your core back, just let the valve body drain  and place it in a garbage bag before shipping please. Just stick the label on the box and drop it off at a UPS location and we will handle the rest.

You have 90 days to return the core before things become complicated. After 90 days eBay and most credit card companies close the transaction and we can no longer process any refunds. We will accept cores after 90 days you will just have to contact us to arrange another way to receive the refund, through PayPal or another EFT processor.

We have been short-staffed since Covid so core processing may take 4-6 weeks once your core is received. We are doing the best we can and we will get your core charge back to you, we just ask for your patience and understanding.

Shipping:
Free Shipping only to the lower 48 Contiguous United States 

either UPS ground or USPS priority our choice. 
Please contact us for pricing on shipping information for international order inquiries.
 

Free Shipping to lower 48 US States Only.
Alaska, Hawaii, Puerto Rico, APO/FPO MUST contact US before purchase 
for options and additional costs No exceptions.

 
Outside United States Shipping ONLY if your location is listed in the 
Global Shipping Program. 
You can see how much it will cost additionally by 
selecting see details on each Item.
Free Shipping is included for each Item Only to the US shipping center.
When you pay for the item through PayPal, you are authorizing 2 payment 
transactions. The first payment goes to the us the seller and consists of the 
item cost and the domestic shipping costs. 
The second payment goes to the global shipping provider and consists of the 
international shipping costs and any import charges. 



Returns:
30 Day return Money Back or replacement Parts must be in good unused(new) condition.
 Buyer to Cover shipping for return unless...
Manufacturer defect is present before use of item & must contact us first 
for an Return Material Authorization Tag.

20% Restock Fee may apply

Please note our valve bodies have identifying markers and tags on them, if you try and return another manufacturers valve body the return will be denied.

Please allow 30-45 days for returns to be processed, all valve bodies must be checked for authenticity before a return will be processed.