eBay

FA1886 Engine Air Filter Replacement for 2008-2010 Ford F250-F550 Super Duty 6.4L Powerstroke V8 Diesel & 2011 F53 6.8L V10 Gas | Replaces 7C3Z-9601-B, AF27687, CA10270

Product Description:

Compatible with:Air Filter for F250 F350 F450 F550 Super Duty 6.4L V8 2008-2010,F53 2011 6.8L V10.

Replaces part number:7C3Z-9601-B,FA1886,CA5369,AF27687,CA10270,LAF2886,P613522,49886.

Feature:Air filter can improve air flow and prevent dirt and dust from entering the engine.Help to maintain engine's performance.

Material:Pleated cellulose-blended paper filter element with plastic rigid frame.

Warm Hint:Please replace the filter regularly to keep the engine in good condition.

Compatible with:

For 2008-2010 F250 Super Duty 6.4L V8

For 2008-2010 F350 Super Duty 6.4L V8

For 2008-2010 F450 Super Duty 6.4L V8

For 2008-2010 F550 Super Duty 6.4L V8

For 2011 F53 6.8L V10

Installation instructions:

1.Release the toggle clamps and raise the Air filter box outlet housing

2.Disconnect the secondary air intake hose from the Air filter box outlet housing and set the housing aside.

3.Pull outboard on the top edge of the Air filter element by hand and remove the element.

4.Clean the interior of Air filter box.

5.Push the new element down and inboard to compress the seal into the Air filter box housing.

6.Connect the secondary air intake hose to the Air filter box outlet housing and position the cover on the Air filter box housing.

7.Secure the 2 toggle clamps.

FD4617 Diesel Fuel Filter Replacement for 6.4L V8 Powerstroke F250 F350 F450 F550 Super Duty 2008-2010 Engine Replaces 8C3Z9N184C 8C3Z-9N184-A

Product Description:

Fitment:Fuel Filter for F250 F350 F450 F550 Super Duty 6.4L V8 Powerstroke 2008-2010 Diesel Engine.

Replaces part number:FD4617,8C3Z9N184A,8C3Z9N184C,PF7934,FK48002,CS10263,L4609F,1848522C93,33950.

Superior Filtration Media:Optimally screening out 98% of abrasives such as water,carbon,sand,dust and bits of metal before they get into your engine.

Easy to install:Just need to spend minutes to replace the filters with socket wrench and hands.

Package Includes:1 x FD4617 Fuel Filter.

Compatible with:

For 6.4L Powerstroke Turbo Diesel Fuel Filter for V8 engines

For F250 Super Duty 2008-2010

For F350 Super Duty 2008-2010

For F450 Super Duty 2008-2010

For F550 Super Duty 2008-2010

The primary fuel filter install:

1.Remove the drain plug uses a 6 mm Allen wrench for the water-fuel separator and drain the fuel into a container.Allow the Horizontal Fuel Conditioning Module to drain completely,then fish out the drain plug and dispose of the fuel.

2.Remove the primary fuel filter cap with a 36 mm socket.

3.Remove the fuel filter from the cap by simply pulling it out. There is a retaining clasp on the fuel filter that snaps into the fuel filter cap.Remove and replace the o-ring from the fuel filter cap.

4.Install the new fuel filter, minding the orientation of the locking clasp and the o-ring. The o-ring side of the fuel filter is not inserted into the cap. The fuel filter should lock into the cap.Lightly coat both o-rings (cap and bottom of filter) of the new fuel filter with clean motor oil before installing into the Horizontal Fuel Conditioning Module.Torque cap to 19 lb-ft (25 N-m).

5.Reinstall the fuel-water separator drain plug.

The secondary fuel filter install:

1.Remove the cap with either a 24 mm socket or 1/2 inch square drive.

2.Remove and discard the used fuel filter.

3.Drain the fuel filter housing of any fuel.Install the new fuel filter into the fuel filter housing.

4.Remove and replace the o-ring on the fuel filter cap. Lightly coat the o-ring with clean motor oil, then reinstall the cap. Torque to 10 lb-ft (14 N-m); do not overtighten the cap.

5.Turn the key into the "run" position (as you would to initiate the glow plug sequence) for 30 seconds, then back to the "off" position. Repeat this procedure a minimum of 3 times in order to prime the fuel system before starting.

FL2016 Oil Filter Replacement for F250 F350 E350 E450 Super Duty Excursion E350 Club Wagon 6.0L/6.4L Powerstroke Diesel Engine Replaces 3C3Z-6731-AA 1840752C91 Included O-rings

Product Description:

FITMENT:For 2003-2010 F-250-550 Super Duty, For 2004-2010 E-350 Super Duty, For 2003-2005 Excursion, For 2004-2005 E-350 Club Wagon, For 2004-2010 E-450 Super Duty, For 2000-2008 F650/F750.More vehicle models in the product description.

REPLACE PART NUMBER:FL2016,3C3Z-6731-AA,1840752C91,PF1704,P7235,CH9549,57311,P550528,LF16166,ML1034.

SUPERIOR FILTRATION MEDIA:Optimally screening out 98% of abrasives such as carbon, sand, dust and bits of metal before they get into your oil.Helps protect against engine wear.Protect your engine and keep your emissions control systems working properly.

Pressure-relief valves:Help minimize the chance of dirty oil circulating back into the engine.Help maintain the supply of oil to the engine under extreme cold conditions or if the filter gets clogged.Anti-drain back valves help prevent oil from draining out of the filter and engine when the engine is not running and resist the aging effects that an engine’s high heat can cause.

UNIQUE ELEMENTS:Allow for eco-friendly disposal of used filters through biodegration, reducing impact on landfills.

Compatibility With:

For 2012-2013 1300 FBC L6-7.6LE-350 Super Duty 2004-2010 6.0L

For E-350 Club Wagon 2004-2005 6.0L

For E-450 Super Duty 2004-2010 6.0L

For Excursion 2003-2005 6.0L

For F250 Super Duty 2003-2007 6.0L/2008-2010 6.4L

For F350 Super Duty 2003-2007 6.0L/2008-2010 6.4L

For F450 Super Duty 2003-2007 6.0L/2008-2010 6.4L

For F550 Super Duty 2003-2007 6.0L/2008-2010 6.4L

For F650 2004-2008 6.0L/2000-2008 5.9L

For F750 2004-2008 6.0L/2000-2008 5.9L

For LCF 2006-2009 V6-4.5L

For 2012-2013 1300 FBC L6-7.6L

For 2005-2007 3000 CHASSIS V8-6.0L

For 2006-2007 3000 IC V8-6.0L

For 2007 3200 V8-6.0L

For 2005 3300 CHASSIS V8-6.0L

For 2012 AC COMMERCIAL BUS V8-6.4L

For 2008 BE COMMERCIAL BUS V8-6.0L

For 2008-2011 BE SCHOOL BUS V8-6.4L

For 2012-2013 BE SCHOOL BUS V8-6.4L

For 2010-2013 CE COMMERCIAL L6-7.6L

For 2008 CE COMMERCIAL L6-7.6L

For 2005-2008 CE COMMERCIAL V8-6.0L

For 2010-2011 CE COMMERCIAL V8-6.4L

For 2011-2013 CE COMMERCIAL V8-6.4L

For 2005-2007 1652SC V8-6.0L

For 2009-2011 1652SC V8-6.0L

For 2008-2011 3200 L6-7.6L

For 2003-2008 3200 V8-6.0L

For 2008-2011 3200 V8-6.4L

For 2005-2007 3300 V8-6.0L

For 2006-2008 4100 V8-6.0L

For 2008-2011 4100 V8-6.4L

For 2006-2008 4100 SBA V8-6.0L

For 2003-2009 4200 V8-6.0L

For 2003-2008 4200LP V8-6.0L

For 2008-2013 4300 L6-7.6L

For 2008-2011 4300 V8-6.4L

For 2011-2012 4300 V8-6.4L

For 2008-2013 4300LP L6-7.6L

For 2008-2011 4300LP V8-6.4L

Installation instruction:

1.Place a suitable drain pan (minimum 15 quart capacity) below the drain plug.

2.Remove the drain plug with a 19 mm or 3/4" box end wrench and allow the engine oil to drain completely.

3.Remove the oil filter cap on the top of the engine using a 36 mm socket.

4.Pull the oil filter and cap straight upwards to remove it from the filter canister.

5.Remove the oil filter from the filter cap by pulling it away from the cap.

6.Remove the old oil filter cap o-ring, Lubricate the new one with clean motor oil,then install it in place.

7.Install the new oil filter. Note that the oil filter clips into the oil filter housing. You will hear it snap into place if it is installed correctly.

8.Reinstall the assembly and torque cap to 25 Nm (19 lb-ft)