Description

 

4-Channel 2.4GHz Transmitter Receiver Kit Wireless Remote Control For Toy Car Model Ship DIY

Applications:
- Suitable for toy models with motors on the left and right sides and differential toys for differential turning (without servo).
- Can be used for differential boats, cars, tanks, etc. Very suitable for differential series DIY.
- Suitable for differential engineering vehicles, excavator, tanks, remote control ships, and bait boats. It is suitable for making differential turning toys driven by motors on left and right sides, such as tanks, excavator, and crawler robots with tracks on left and right sides. It is also suitable for remote control ships with two propellers on the left and right.

Attention: It is not very suitable for ordinary toy cars. Because the direction motor and drive motor of ordinary toy cars can move independently and do not rely on differential turns.

Specifications:
- Transmitter board: 2.2V -4.5V
- Receiving board: 3.6V-9V
- Distance: 100m and antennas do not need to be extended
- Frequency: high frequency 2.4G. Need to pair frequency for stable signals
- Power: high power. Integrated motor driver chip on the receiving board with MOS tubes features high driving efficiency and power saving. It is not a triode driver. The maximum current of 2A does not burn the board.It is generally suitable for small and medium motors within #380.

Pair Frequency (Pair Code):
Connect, press and hold buttons on the remote control at the same time, and power on. At this time, indicator light on the transmitting board flashes quickly and enters paring frequency mode (if the receiver board is not power on in 15 seconds, it will automatically exit). Power on the receiving board again, and then you will see the indicators of the receiving board and the remote control flash 3 times slowly, which indicates that pairing is finished. (When multiple sets of transceiver modules are coded at the same time, remember that only one set can be coded at a time, and the other modules must be powered off.)

Attention: After successful paring frequency, there is no need to pair frequency next time. If the transmitting board or receiving board is lost, the new ones can be paired and used again. One remote control can be paired with multiple receivers to control.

Functions of Buttons (When one button is pressed, two motors will automatically cooperate to achieve a differential turn):
Button on the upper left corner of transmitter board: Press to realize two motor CW

Button on the bottom left corner of transmitter board: Press to realize two motor CCW

Left button on the right side of transmitter board: Press to make one motor CW and the other CCW (Tank and ship are turning at different speeds, without servo)

Right button on the right side of transmitter board: Press to make one motor CW and the other CCW (Tank and ship are turning at different speeds, without servo)

You can also turn left and right while moving forward or backward.

Attention: Reverse connection of motors is allowed. Press the forward and backward buttons of on the transmitter. When moving forward, if one motor is running in CW and the other is running in CCW, just reverse the two wires on the motor running CCW to adjust it. In short, if you reverse the two wires of a motor, its direction of rotation will be reversed! After the adjustment is correct, weld motor wire firmly.

Package Included:
- 1 x Set of 2.4G Remote Control Transceiver Board

Note:
- Power supply compartment, power wires and motor wires are included.
- Batteries and other items in the pictures are not included.
- The remote control and receiver set have been debugged by the manufacturer before delivery.