Product100% Brand New Product, Quality Ensured, Provide You the Best Confident and Support! 90 Days Warranty, Money Back Guarantee, No Risk, No Hassle! | ShippingFree Shipping. Handling time: 2 Business day. Item is shipped to ebay address.Leaving correct.address can minimize delay. Tracking information. will be sent once item is shipped. | ContactWe have a friendly and dedicated support teams to handle any problems you come up with our products. Please contact us first via email or message for replacement, refund or technical problem caused by any reason. |
The VTEC (Variable Valve Timing and Lift Electronic Control) system increases the amount of intake valve lift for increased power. It accomplishes this by turning a control solenoid 'ON' to allow oil pressure into the VTEC control passages to apply pins that will lock the intake rockers. When the oil pressure is present, the pressure switch signal will go high. When the control solenoid is turned 'OFF', the oil pressure is dumped and the oil pressure switch signal will go low.
If the pressure switch signal is not logical for the commanded state of the control solenoid, a DTC will set and the PCM will go into a 'fuel-cut' mode limiting engine rpm and performance. The PCM simply doesn't 'know' what the state of the intake valves are, so you end up with the symptoms you describe.
Specifications:
Fits for:
For 2003 - 2007 Honda Accord 2Dr Coupe
For 2003 - 2007 Honda Accord 4Dr Sedan
For 2002 - 2005 Honda Civic (Si Models Only)
For 2002 - 2009 Honda CR-V (All Models)
For 2003 - 2011 Honda Element (All Models)
For 2002 - 2006 Acura RSX (Base, L Models Only)
Please Double-Check that this is compatible with your vehicle.
How to Replace the VTEC Solenoid:
Step 1: Removing the VTEC Solenoid.
Locate the solenoid on the backside of the engine, facing the firewall.Remove the 10mm bolts from the solenoid.
Disconnect the solenoid connector and pull the solenoid out.
Press the clips and remove them from the solenoid.
Disconnect the wiring harness with needle nose pliers.
Step 2: Installing the VTEC Solenoid.
Clean and wipe down the mating surface with a paper towel, place a tab of clean oil on the gasket.
Insert a bolt into the solenoid, insert the solenoid into place.
Tighten the three 10mm bolts.
Connect the wiring harnesses, and lip the harness into the solenoid.

Welcome to Racing_Speed_Autoparts!
We are a company that has been specialized in manufacturing and selling various auto parts for 12 years. The company has rich experience in the expertise of auto parts and designs and develops products of various materials and models by itself, and its various stamping parts are up to thousands of kinds. Among them are OE parts for GM, Honda, Toyota, Volkswagen, Mercedes-Benz, BMW, etc. Our factory strives for survival by quality and development by reputation, which is our aim. Now we have entered the international market and our products are exported to the United States, Japan, Indonesia, Southeast Asia and other regions. We are willing to go hand in hand with you, promote each other and develop together.
If you encounter unpleasant things in shopping, please contact us in time, we will reply and provide solutions within 24 hours!
| Brand | racing_speed_autoparts |
|---|---|
| Other Part Number | 2T1147, 7V5008, 917224, VVS214, VVT144 |
| Type | Solenoid Spool Valve w/ Gasket |
| Interchange Part Number | 15810-RAA-A01,15810-PRB-A03,15810-RAA-A03, For Honda CR-V Accord Civic Acura RSX Element 2.0L 2.4L |
| OE/OEM Part Number | 15810-RAA-A01,15810-PRB-A03,15810-RAA-A03 |
| Manufacturer Warranty | 3 Years |
| Fitment Type | Direct Replacement |
| Manufacturer Part Number | 15810-RAA-A01,15810-PRB-A03,15810-RAA-A03 |
| Fit for | For Honda CR-V Accord Civic Acura RSX Element 2.0L 2.4L |
| Material | Stainless Steel |
| Features | Includes Gaskets, Sealed |
| Superseded Part Number | 15810PNEG01, 15810PPAA01, 15810RAAA01, 15810RAAA02, 15810-PNE-G01, 15810-RAA-A02 |
| Vintage Part | No |
| Performance Part | No |
