Intended Use: This fiber cable transmits lumination from a light source to a surgical instrument of Surgical Headlight. The fiber optic cable is compatible in light sources with a power rating up to 300-watt Xenon

Warning: Never look into the optical end while connected to a light source. Always turn off the light source prior to removing the cable. The light source connector may become hot during use. Never rest the cable end on a patient of bedding. To prevent cable damage any Xenon light source used should have a minimum of 90% IR Rating.

Handling : With proper treatment and care, a fiber optic cable can stay in service for long intervals.

Avoid stretching the cable, forming configurations involving sharp angles or kinks, or contact with sharp objects. Do not place objects on the cable that could crush it. Keep the optical faces from contacting the floor and free of fingerprints, foreign matter, and scratches. Handle the cable by the strain relief when removing it from the light source. Remove the cable from service immediately if a puncture is found in the outer sheathing.

Cleaning: A moist cloth or soft bristled brush moistened with a neutral pH enzymatic cleaner or mild soap and water is recommended to remove visible debris. Wipe or brush as necessary to remove the debris. Do not use synthetic detergents or oil based soap, as the chemicals may cause skin irritation.

Rinse thoroughly in warm tap water, followed by a distilled rinse.

We DO NOT certify any equipment to be patient ready. This equipment must be tested and certified by a licensed medical technician prior to patient use.

Please reach out to us before you leave any negative feedback.

"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item."